[ANNOUNCE] VDR developer version 2.1.7

Forum principale per problemi di compilazione, installazione, configurazione etc.

Moderatori: ragno, tapino, alez, zulu, davidea

Rispondi
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

[ANNOUNCE] VDR developer version 2.1.7

Messaggio da von fritz »

Hello

dopo quasi un anno :shock:
dalla mailinglist :
The changes since version 2.1.6:

- No longer logging an error message in DirSizeMB() if the given directory doesn't
exist. This avoids lots of log entries in case several VDRs use the same video
directory and one of them has already physically removed a recording directory,
while the others still have it in their list of deleted recordings.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- A cCamSlot that has WantsTsData set to true in its constructor now also gets
the CAT and EMM PIDs data.
- Fixed a possible division by zero in frame rate detection.
- VDR now reads command line options from *.conf files in /etc/vdr/conf.d (thanks
to Lars Hanisch). See vdr.1 and vdr.5 for details.
- Fixed a possible crash in the LCARS skin (thanks to Thomas Reufer).
- Updated the dvbhddevice plugin source.
- Fixed a bug in the Makefile when installing plugins with LCLBLD=1 (thanks to
Stefan Huelswitt).
- The pid of the PMT in which the CA descriptors of a given channel are broadcast
is now stored together with the CA descriptors and can be retrieved by calling
GetPmtPid() (this information is only required to receive encrypted channels
with the OctopusNet receiver via the 'satip' plugin).
- Channels that are not listed in the SDT are now only marked as OBSOLETE if
"Setup/DVB/Update channels" is set to a value other than "no" or "PIDs only".
- Fixed multiple OBSOLETE marks in channels that are not listed in the SDT in case
"Setup/Miscellaneous/Show channel names with source" is set to "yes".
- The new function cOsd::DrawScaledBitmap() is now used for drawing subtitles.
This function can be reimplemented by high level OSDs which may be able to do
the scaling in hardware or otherwise more efficiently (thanks to Thomas Reufer).
- Fixed detaching receivers from devices in case a CAM needs to receive the TS
(reported by Dietmar Spingler).
- Fixed resetting the receiver for EMM pids for CAMs that need to receive the TS
(reported by Dietmar Spingler).
- Fixed (well, actually worked around) a problem with subtitles not being displayed
because the broadcaster doesn't set the data's version numbers as required by the
DVB standard (thanks to Rolf Ahrenberg).
- Fixed support for systemd (thanks to Christopher Reimer).
- Added a missing backslash to the help text of the SVDRP command MOVR (thanks to
Lars Hanisch).
- Added subsystem id support for DVB devices connected via USB (thanks to Jose
Alberto Reguero).
- Added the functions IndexOf(), InsertUnique(), AppendUnique() and RemoveElement()
to the cVector class (thanks to Stefan Schallenberg).
- Fixed a possible out-of-bounds access in cVector::Remove().
- Added functions to set and retrieve the priority of a cReceiver (suggested by
Frank Schmirler).
- Added the new parameters "Setup/Miscellaneous/Volume steps" and
".../Volume linearize" (thanks to Claus Muus). See the MANUAL for details.
- Fixed jumping to an absolute position via the Red key in case replay was paused
(reported by Dieter Ferdinand).
- Changed the German weekday names from "MonDieMitDonFreSamSon" to
"Mo.Di.Mi.Do.Fr.Sa.So." (thanks to Stefan Blochberger).
- Now handling CAT sections that consist of more than one TS packet.
- Added handling for DTS audio tracks to cPatPmtParser::ParsePmt() (thanks to
Thomas Reufer).
- Added support for PGS subtitles (thanks to Thomas Reufer).
- Use of the function cOsd::GetBitmap() outside of derived classes is now deprecated,
and it may be made 'protected' in a future version, since it doesn't work with
TrueColor OSDs. Plugin authors may want to modify their code so that it
works without this function.
- Modified the descriptions of several threads, so that the important information
(like device or frontend numbers) is within the first 15 characters of the
string, because only these are displayed in thread listings. Plugin authors may
want to do the same.
- Added the channel name to log messages that reference a channel (suggested by
Dietmar Spingler).
- Modified the CAM API so that it is possible to implement CAMs that can be freely
assigned to any devices (thanks to Jasmin Jessich).
- Plugins can now implement the function SetMenuSortMode() in their skin objects
derived from cSkinDisplayMenu, to get informed about the currently used sort
mode, if applicable (suggested by Martin Schirrmacher).
- Added cOsdProvider::OsdSizeChanged(), which plugins that implement an output device
can call to signal a change in the OSD that requires a redraw of the currently
displayed object (thanks to Thomas Reufer).
- Added a comment to cRecorder::Activate() about the need to call Detach() in the
destructor (suggested by Eike Sauer).
- Now returning from removing deleted recordings after at most 10 seconds, or if the
user presses a remote control key, to keep the system from getting unresponsive
when removing a huge number of files (reported by Dieter Ferdinand).
- Fixed generating the index file of an existing recording in case at the of a TS file
there is less data in the buffer than needed by the frame detector. In such a case
it was possible that frames were missed, and there was most likely a distortion
when replaying that part of a recording. This is mostly a problem for recordings that
consist of more than one *.ts file. Single file recordings could only lose some
frames at their very end, which probably doesn't matter. At any rate, if you have
generated an index file with VDR version 2.0.6, 2.1.5 or 2.1.6, you may want to
do so again with this version to make sure the index is OK.
- Added the new command line option --updindex, which can be used to update an
incomplete index of a recording (based on a patch from Helmut Auer).

Have fun!

Klaus
primo post dell 2015 :lingua:

:zz:
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
Avatar utente
alez
Messaggi: 3074
Iscritto il: 09 mag 2007, 17:11

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da alez »

Buon anno allora :) :lol:
Ciao alez
tapino
Messaggi: 523
Iscritto il: 28 gen 2007, 11:50

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da tapino »

Salve e buon anno, dopo la Testing arriva anche la nuova versione stable :
ftp://ftp.tvdr.de/vdr/vdr-2.0.7.tar.bz2
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da nino »

Aggiornamento alla 2.0.7 a breve.
Grazie tap.
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da nino »

Vdrbox HD aggiornata a vdr 2.0.7. Tutto bene.
Ciao.
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da von fritz »

Aggiornato alla 2.1.7 e adesso non ho più bisogno di patchare con le 2 patch per far passare gli EMM.
la mia Tivusat si aggiorna regolarmente :si:

un :ok: a Klaus
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da nino »

Ciao von,
come mai si usavano delle patch per tivusat? Da me si è sempre aggiornata prima con sbox e poi con oscam, ma sempre con versioni di vdr 2.0.x.
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da von fritz »

Ciao nino,
Bhe, avendo la scheda tivusat in remoto e non in locale era "necessario" patchare con la catemmpids-02.diff.
Probabilmente tenendo la scheda in locale non serviva. Però spostando le schede in remoto (dvbapi.OSCamNetwork = 1) non passavano più gli EMM alla tivusat.
Adesso con la 2.1.7 ho solo dvbapi e in remoto (dockstar) oscam + lettori.

:ciao:

PS. se non "sposto" qualcosa, mi annoio :D
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.7

Messaggio da nino »

Ahh ho capito. Grazie.
Buoni spostamenti allora.
Alla prossima.
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Rispondi