[ANNOUNCE] VDR developer version 2.1.8

Forum principale per problemi di compilazione, installazione, configurazione etc.

Moderatori: ragno, tapino, alez, zulu, davidea

Rispondi
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

[ANNOUNCE] VDR developer version 2.1.8

Messaggio da von fritz »

Hello

Dalla malinglist:
VDR developer version 2.1.8 is now available at

ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.8.tar.bz2

A 'diff' against the previous version is available at

ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.7-2.1.8.diff

MD5 checksums:

1d2751e87def9b18b448513f24e635e9 vdr-2.1.8.tar.bz2
0487e037278f6f6684a7933674910f05 vdr-2.1.7-2.1.8.diff

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.


The changes since version 2.1.7:

- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed "warning: invalid suffix on literal" with GCC 4.8 and C++11 (thanks to Joerg
Bornkessel).
- Fixed the link to "svdrpsend (1)" in the vdr.1 man page (thanks to Chris Mayo).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Added functionality based on the "jumpplay" patch from Torsten Kunkel and Thomas
Günther:
+ The new option "Setup/Replay/Pause replay when jumping to a mark" can be used to
turn off pausing replay when jumping to an editing mark with the '9' key.
+ The new option "Setup/Replay/Skip edited parts" can be used to automatically skip
the edited parts of a recording during replay, without the need to actually cut
the recording.
+ The new option "Setup/Replay/Pause replay at last mark" can be used to make replay
go into Pause mode when it has reached the last "end" mark.
+ The '8' key for testing an edited sequence now also jumps to the next *end*
mark if "Setup/Replay/Skip edited parts" is active. This allows for testing edits
in recordings that have actually been cut, as well as recordings that have not
been cut, in case "Skip edited parts" is enabled.
- Added support for "Satellite Channel Routing" (SCR) according to EN50607, also
known as "JESS" (thanks to Manfred Völkel and Frank Neumann).
- The keys '1' and '3' can now be used in replay mode to position an editing mark
in "binary" mode (based on a patch from Rolf Ahrenberg, with modifications by Helmut
Auer). See MANUAL, section "Editing a Recording".
- The Yellow button in the "Setup/CAM" menu can now be used to put the selected
CAM into a mode where it remains assigned to a device that is tuned to the current
channel until the smart card it contains is activated and the CAM thus starts to
descramble (see MANUAL, section "Setup/CAM" for details).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Added ARGSDIR to the ONEDIR section of Make.config.template (suggested by Derek
Kelly).
- Made cRecording::GetResume() public (suggested by Stefan Braun).
- Fixed setting the read index in cDvbPlayer::Goto() in case Still is false.
- The function cDvbPlayer::Goto() now automatically calls Play() if Still is false.
- Added support for LCN (Logical Channel Numbers), which plugins may use to sort
channels (thanks to Rolf Ahrenberg).

Have fun!

Klaus

Poi aggiunge anche:
On February 19 (less than 3 weeks from now) it's going to be 15 years
since the release of the very first revision of VDR. To celebrate this
anniversary I'm planning on releasing a new stable version 2.2.0 on that
very day.

In order to help making this new version as stable as possible, please
test the developer version 2.1.8 that I have just released today very
thoroughly and report any bugs you might find. There will be one more
developer version (2.1.9) which I plan to release next sunday (Feb 8).

I would also appreciate if you could provide any missing translations
for the OSD texts. Here's a list of all *.po files that need to be
updated, followed by the number of missing translations:

ar.po: 49
ca_ES.po: 49
cs_CZ.po: 49
da_DK.po: 182
el_GR.po: 245
es_ES.po: 49
et_EE.po: 10
fr_FR.po: 49
hr_HR.po: 182
hu_HU.po: 49
it_IT.po: 10
lt_LT.po: 49
mk_MK.po: 49
nl_NL.po: 49
nn_NO.po: 310
pl_PL.po: 49
pt_PT.po: 77
ro_RO.po: 10
ru_RU.po: 49
sk_SK.po: 49
sl_SI.po: 50
sr_RS.po: 49
sv_SE.po: 49
tr_TR.po: 182
uk_UA.po: 49
zh_CN.po: 49

Thanks to everyone for using VDR and contributing to its development,
and for keeping this project alive for 15 years!

Klaus
già 15 anni :shock: dunque testate, testate :pc: che si sta avvicinando la prossima "stable".

:ciao:
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da von fritz »

Sembra che si sia dimenticato di una patch che in caso di un EPG corrotto rimedia un "memory leak".
postata su vdrportal da @mini73 alias Lars:
LINK

:ciao:
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
tapino
Messaggi: 523
Iscritto il: 28 gen 2007, 11:50

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da tapino »

Ciao vonfritz
sembra che fra le varie lingue del OSD Text che non hanno ancora la traduzione attuale manca anche l italiano.
Dopo l abbandono di Gringo nessuno se mai cimentato?
Nel caso chiederei al nostro amico se ha ancora 5 minuti di tempo e attualizzare la nuova versione :D
Saluti
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da nino »

ho appena provveduto a inviare a Klaus il mio file della lingua italiana completo.
Buona giornata a tutti.
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da von fritz »

:ok:

Buona giornata!
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
Avatar utente
Gringo
Messaggi: 1796
Iscritto il: 21 gen 2007, 19:36

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da Gringo »

tapino ha scritto:Ciao vonfritz
sembra che fra le varie lingue del OSD Text che non hanno ancora la traduzione attuale manca anche l italiano.
Dopo l abbandono di Gringo nessuno se mai cimentato?
Nel caso chiederei al nostro amico se ha ancora 5 minuti di tempo e attualizzare la nuova versione :D
Saluti
Chi l'ha mai detto che ho abbandonato la traduzione di VDR?
Leggete la prima riga della versione 2.1.7 e capirete chi continua a fare le traduzioni (anche delle versioni precedenti).

Anche se non uso più VDR non vuole dire che non ci tenga a continuare un lavoro iniziato nel lontano 2006 :-)
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
tapino
Messaggi: 523
Iscritto il: 28 gen 2007, 11:50

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da tapino »

Ciao Gringo , scusa non avevo letto il tutto ma solo la lista dei .po mancanti.
Mi sembra strano allora che include anche< it_IT.po: 10 > nella lista da aggiornare .
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da von fritz »

Hello

Bhe io l'avevo letto e infatti mi aspettato una reazione "argentina" :mrgreen:
bhe per le ultime 10 mancanti, probabilmente avra sospeso per :nocen: :D
comunque meglio in due che nessuno. ;)

:ciao:
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
Avatar utente
Gringo
Messaggi: 1796
Iscritto il: 21 gen 2007, 19:36

Re: [ANNOUNCE] VDR developer version 2.1.8

Messaggio da Gringo »

Ho già fatto tutto ieri sera, ora è a posto.

Visto che avevo qualche giorno prima del rilascio ufficiale pensavo di farlo con calma, tutto qui.
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Rispondi