[ANNOUNCE] VDR developer version 2.1.9

Forum principale per problemi di compilazione, installazione, configurazione etc.

Moderatori: ragno, tapino, alez, zulu, davidea

Rispondi
Avatar utente
von fritz
Messaggi: 1479
Iscritto il: 18 gen 2007, 23:33

[ANNOUNCE] VDR developer version 2.1.9

Messaggio da von fritz »

Hello

Dalla mailinglist:
VDR developer version 2.1.9 is now available at

ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.9.tar.bz2

A 'diff' against the previous version is available at

ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.8-2.1.9.diff

MD5 checksums:

59a63596f3fcfe7c81df8e92b4486f78 vdr-2.1.9.tar.bz2
e70d236f79bee5110f763a8109dba3d9 vdr-2.1.8-2.1.9.diff

Approaching version 2.2.0:
==========================

If there are no more serious bug reports, the final version 2.2.0 of VDR
shall be released on February 19, 2015, which marks the 15th anniversary
of VDR.
So please test this developer version intensely and report any problems
you might encounter as soon as possible.

The following language files still have the given number of untranslated texts:

ar.po: 51
ca_ES.po: 51
cs_CZ.po: 51
da_DK.po: 184
el_GR.po: 247
es_ES.po: 51
et_EE.po: 4
fi_FI.po: 1
fr_FR.po: 51
hr_HR.po: 184
it_IT.po: 4
lt_LT.po: 4
mk_MK.po: 51
nl_NL.po: 51
nn_NO.po: 312
pl_PL.po: 51
pt_PT.po: 79
ro_RO.po: 1
ru_RU.po: 51
sk_SK.po: 51
sl_SI.po: 52
sr_RS.po: 51
sv_SE.po: 51
tr_TR.po: 184
uk_UA.po: 4
zh_CN.po: 51

If nobody takes care of these, they will remain untranslated in version 2.2.0.

DEADLINE FOR SUBMITTING TRANSLATIONS IS WEDNESDAY, FEBRUARY 18!


The changes since version 2.1.8:

- Fixed a memory leak in case of broken Extended Event Descriptors (thanks to Lars
Hanisch).
- Fixed the German translation of "Binary skip timeout (s)" (thanks to Matthias
Senzel).
- Fixed the German translation of "VDR will shut down later - press Power to force".
- Fixed the Finnish translation of "Binary skip timeout (s)" (thanks to Rolf
Ahrenberg).
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- Added SDNOTIFY to Make.config.template (suggested by Christian Richter). Also
added NO_KBD and BIDI.
- Added code from the "jumpplay" patch that makes the recording still be considered
unviewed when stopping replay within RESUMEBACKUP seconds of the first mark.
- The new option "Setup/Replay/Alternate behavior for adaptive skipping" can be used
to make adaptive skipping only halve the skip distance when the direction changes.
That way you can reach the desired point in a recording even if you make one too
many skips in a certain direction (see MANUAL for details).
- Fixed cCamSlot::Assign(), so that it actually ignores the value of Query if Device
is NULL (as described in the header file).
- Added a missing VDRDIR="$(CWD)" to the clean-plugins target of the Makefile, to
avoid error messages regarding the missing vdr.pc file.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the Hungarian OSD texts (thanks to István Füley).
- Fixed switching channels in the Schedule menu after going through various Now and
Schedule menus for different channels (reported by Matthias Senzel).
- Fixed setting the Blue button in the Schedule/Now/Next menus, so that it only shows
"Switch" if the selected event is on a different channel.
- Added "NORDIG" to the list of "DVB/Standard compliance" options and using it to
restrict the LCN (Logical Channel Numbers) parsing to networks that actually use
this non-standard feature (thanks to Rolf Ahrenberg).
- In the "Edit recording" menu the '0' key can now be used on the "Name:" field to
remove the name of the recording and replace it with the last element of the
recording's folder path name (suggested by Christoph Haubrich). See MANUAL, section
"Managing folders" for details.
- Updated the Italian OSD texts (thanks to Nino Gerbino).
- The "Select folder" menu now adds the folder names of all existing recordings to
any names that have been predefined in "folders.conf" (suggested by Sören Moch).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Fixed the German translations of "latitude" and "longitude" (they were swapped).
- Updated the Hungarian OSD texts (thanks to Mario Fenneis).
- Modified runvdr.template to improve compatibility with the "bash" and "dash" shells.
- Changed the German translations if the texts related to "binary skipping" (based
on a suggestion by Thomas Reufer).
- Updated sources.conf to reflect the fact that Astra 4A and SES5 are actually in
two separate positions (thanks to Arthur Konovalov).
- Fixed cMarks::GetNextBegin() and cMarks::GetNextEnd() (thanks to Stefan Herdler).
The behavior of these two functions is now exacly as described in the header file.
Editing marks that are placed at exactly the same offset in a recording are now
preserved in the cutting process.
- Changed the naming of "binary skip mode" to "adaptive skip mode" (suggested by
Rolf Ahrenberg and Derek Kelly).
- cDvbPlayer and cReplayControl now use the same list of editing marks. This avoids
inconsistent behavior with the "Skip edited parts" or "Pause replay at last mark"
functions when the editing marks are manipulated during replay.
- Fixed setting an empty recording name or folder to a blank in the "Edit recording"
menu (reported by Christoph Haubrich).
- Added a confirmation before renaming a recording to its folder name (suggested
by Christoph Haubrich).
- Modified EntriesOnSameFileSystem(), so that it returns 'true' if either of the given
files doesn't exist (to avoid any actions that might be triggered if files are on
different file system), and changed handling the 'error' variable in cDirCopier, so
that it is initialized to 'true' and will only be set to 'false' if the entire
copy process has been successful (problem reported by Christoph Haubrich).
- Added the UPDATE-2.2.0 file.

Have fun!

Klaus
:ciao:
VDRBOX-HD : in pensione!
ALTRO : freerunner (openmoko) ; nokia n900 ; 2 seagate dockstar, samsung ps64d8000, diversi dispositivi ARM (Allwinner, Amlogic) ;)
Don't feed the trolls non alimentate sistemi proprietari ;)

Linux rulez! :)
Avatar utente
Gringo
Messaggi: 1796
Iscritto il: 21 gen 2007, 19:36

Re: [ANNOUNCE] VDR developer version 2.1.9

Messaggio da Gringo »

Tradu al 100%, già inviata a Klaus e pronta per il rilascio finale.

Buon VDR a tutti coloro che ancora lo usano e che lo scopriranno in futuro :-)
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.9

Messaggio da nino »

@ Gringo,
vista la mail di Klaus che ha inviato a entrambi, in allegato la mia versione finale. L'ultima parola tocca a te.
Ciao.
Allegati

[L’estensione diff è stata disattivata e non può essere visualizzata.]

VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Avatar utente
Gringo
Messaggi: 1796
Iscritto il: 21 gen 2007, 19:36

Re: [ANNOUNCE] VDR developer version 2.1.9

Messaggio da Gringo »

@Nino: ho appena mandato la mail a Klaus con le ultime modifiche (ho preso spunto di alcune cose che hai segnalato mentre altre ho preferito tenerle così come erano per fare una certa coerenza non solo alla traduzione in se ma anche al manuale che avevo tradotto a suo volta).

Sono sciocchezze ma l'apporto di qualche altro occhio non guasta mai.

Ti rigrazio
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
nino
Messaggi: 319
Iscritto il: 19 gen 2007, 23:43

Re: [ANNOUNCE] VDR developer version 2.1.9

Messaggio da nino »

Perfetto. Ciao.

Saluti a tutti
VDRbox HD: P4 3.06 ghz, 1 gb di ram, 2 HDD IDE 250+320 gb, NVIDIA GT520 PCI passiva, VDR 2.2.0, openSUSE 13.1, Hauppauge Nova PCI DVB-S2, Technotrend DVB-T 1500 PCI, telecomando Hauppauge, case Accent HT-200.

Vu+ Duo2 BH 2.1.5.
Rispondi