Technotrend 2.3 Premium non carica piu' firmware

Cosa serve o si può utilizzare per il nostro VDR
Schede DVB, DVT, DVBS2 etc.
Case, schede madri, processori etc.
Autocostruzioni, progetti etc.

Moderatori: ragno, tapino, alez, zulu, davidea

Rispondi
SoGo
Messaggi: 737
Iscritto il: 19 gen 2007, 21:36

Technotrend 2.3 Premium non carica piu' firmware

Messaggio da SoGo »

Come da titolo la mia vdrbox con a bordo Technotrend 2.3 Premium all'avvio non mi carica piu' il firmware,sul vdr ho due schede una sat appunto e una terrestre,mentre visionavo il terrestre ed ero precisamente su canale 5 provvisorio mi si è impallato tutto,o meglio mi sono apparse delle strisce verticali in stile arcobaleno;fatto sta che ho douto spegnere proprio fisicamente la macchina,al rivvio ha funzionato tutto nuovamente ma il giorno dopo mentre vedevo la tv di botto schermo nero ho riavviato sia vdr che pc nada de nada.
Avendo due vdr a casa ho invertito le schede ed ho verificato che la Technotrend 2.3 Premium all'avvio non prende piu il firmware.....cerco qualche suggerimento grazie.
Avatar utente
ragno
Messaggi: 3017
Iscritto il: 20 gen 2007, 09:43
Località: Marte e dintorni
Contatta:

Re: Technotrend 2.3 Premium non carica piu' firmware

Messaggio da ragno »

Posta il dmesg.
Le FF non devono ricevere il firmware in upload perche' ce l'hanno gia.
E' piu' probabile che si sia azzerata la eprom e i driver di linux >= 2.6 non la riconoscono piu' correttamente.

ciao
vdr: 1.4.7+extpatch54 (pensionata), 1.7.27 (yavdr 0.4)
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.

E quando penso che sia finita,
è proprio allora che comincia la salita.
SoGo
Messaggi: 737
Iscritto il: 19 gen 2007, 21:36

Re: Technotrend 2.3 Premium non carica piu' firmware

Messaggio da SoGo »

root@vdr-desktop:~# dmesg
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ea800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6F10 checksum 0
[ 0.000000] ACPI: RSDP 000F6F10, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 0FFFB822, 002C (r1 PTLTD RSDT 1 LTP 0)
[ 0.000000] ACPI: FACP 0FFFB84E, 0074 (r1 HP HolmesHZ 1 PTL 1)
[ 0.000000] ACPI: DSDT 0FFFB8C2, 4317 (r1 HP HolmesHZ 1 MSFT 1000007)
[ 0.000000] ACPI: FACS 0FFFFFC0, 0040
[ 0.000000] ACPI: BOOT 0FFFFBD9, 0027 (r1 PTLTD $SBFTBL$ 1 LTP 1)
[ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: acpi=force override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000eb000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000eb000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65009
[ 0.000000] Kernel command line: root=UUID=91869cfe-e928-4712-b50e-e36b15f84c8f ro acpi=force quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 551.278 MHz processor.
[ 42.380962] Console: colour VGA+ 80x25
[ 42.380978] console [tty0] enabled
[ 42.381705] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.382293] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 42.413891] Memory: 247460k/262080k available (2157k kernel code, 14064k reserved, 998k data, 364k init, 0k highmem)
[ 42.413922] virtual kernel memory layout:
[ 42.413926] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 42.413931] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 42.413937] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 42.413942] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 42.413947] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 42.413952] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 42.413957] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 42.413969] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 42.414078] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 42.494098] Calibrating delay using timer specific routine.. 1103.79 BogoMIPS (lpj=2207597)
[ 42.494195] Security Framework initialized
[ 42.494223] SELinux: Disabled at boot.
[ 42.494275] AppArmor: AppArmor initialized
[ 42.494289] Failure registering capabilities with primary security module.
[ 42.494323] Mount-cache hash table entries: 512
[ 42.494750] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 42.494791] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 42.494800] CPU: L2 cache: 512K
[ 42.494811] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 42.494849] Compat vDSO mapped to ffffe000.
[ 42.494895] Checking 'hlt' instruction... OK.
[ 42.510857] SMP alternatives: switching to UP code
[ 42.515299] Freeing SMP alternatives: 11k freed
[ 42.515698] Early unpacking initramfs... done
[ 43.850948] ACPI: Core revision 20070126
[ 43.851269] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 43.854938] ACPI: setting ELCR to 0200 (from 0a00)
[ 43.855683] CPU0: Intel Pentium III (Katmai) stepping 03
[ 43.855703] SMP motherboard not detected.
[ 43.855711] Local APIC not detected. Using dummy APIC emulation.
[ 43.855908] Brought up 1 CPUs
[ 43.855984] CPU0 attaching sched-domain:
[ 43.855994] domain 0: span 01
[ 43.856001] groups: 01
[ 43.856786] net_namespace: 64 bytes
[ 43.856813] Booting paravirtualized kernel on bare hardware
[ 43.859128] Time: 19:26:51 Date: 11/16/12
[ 43.859242] NET: Registered protocol family 16
[ 43.860395] EISA bus registered
[ 43.860430] ACPI: bus type pci registered
[ 43.862460] PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
[ 43.862470] PCI: Using configuration type 1
[ 43.862478] Setting up standard PCI resources
[ 43.875001] ACPI: EC: Look up EC in DSDT
[ 43.907825] ACPI: Interpreter enabled
[ 43.907837] ACPI: (supports S0 S1 S4 S5)
[ 43.907881] ACPI: Using PIC for interrupt routing
[ 43.958624] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 43.959124] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 43.959131] * this clock source is slow. Consider trying other clock sources
[ 43.959194] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 43.959206] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 43.959832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 43.965576] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 43.965944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 43.966235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 43.966525] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *9 10 11 14 15)
[ 43.967005] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 43.967175] pnp: PnP ACPI init
[ 43.967205] ACPI: bus type pnp registered
[ 44.043133] pnp: PnP ACPI: found 12 devices
[ 44.043143] ACPI: ACPI bus type pnp unregistered
[ 44.043157] PnPBIOS: Disabled by ACPI PNP
[ 44.044467] PCI: Using ACPI for IRQ routing
[ 44.044480] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 44.061722] NET: Registered protocol family 8
[ 44.061731] NET: Registered protocol family 20
[ 44.062050] AppArmor: AppArmor Filesystem Enabled
[ 44.065684] Time: tsc clocksource has been installed.
[ 44.073904] system 00:0b: ioport range 0x8000-0x803f has been reserved
[ 44.073918] system 00:0b: ioport range 0x1040-0x104f has been reserved
[ 44.106103] PCI: Bridge: 0000:00:01.0
[ 44.106112] IO window: disabled.
[ 44.106123] MEM window: f4200000-f4ffffff
[ 44.106133] PREFETCH window: f5000000-f5ffffff
[ 44.106186] NET: Registered protocol family 2
[ 44.146000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 44.146916] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 44.147166] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 44.147424] TCP: Hash tables configured (established 8192 bind 8192)
[ 44.147434] TCP reno registered
[ 44.158122] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 45.319499] it is
[ 46.704523] Freeing initrd memory: 7702k freed
[ 46.705213] Simple Boot Flag value 0xff read from CMOS RAM was invalid
[ 46.705225] Simple Boot Flag at 0x3b set to 0x1
[ 46.706868] audit: initializing netlink socket (disabled)
[ 46.706915] audit(1353094014.288:1): initialized
[ 46.718328] VFS: Disk quotas dquot_6.5.1
[ 46.718707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 46.719297] io scheduler noop registered
[ 46.719308] io scheduler anticipatory registered
[ 46.719316] io scheduler deadline registered
[ 46.719387] io scheduler cfq registered (default)
[ 46.719422] Limiting direct PCI/PCI transfers.
[ 46.719480] Boot video device is 0000:01:00.0
[ 46.720800] isapnp: Scanning for PnP cards...
[ 47.075326] isapnp: No Plug & Play device found
[ 47.258393] Real Time Clock Driver v1.12ac
[ 47.258843] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 47.259168] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 47.259610] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 47.261858] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 47.262807] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 47.267017] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 47.267323] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 47.267792] PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
[ 47.267804] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 47.268758] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 47.277089] mice: PS/2 mouse device common for all mice
[ 47.277689] EISA: Probing bus 0 at eisa.0
[ 47.277710] Cannot allocate resource for EISA slot 1
[ 47.277755] Cannot allocate resource for EISA slot 8
[ 47.277762] EISA: Detected 0 cards.
[ 47.277773] cpuidle: using governor ladder
[ 47.277781] cpuidle: using governor menu
[ 47.278405] NET: Registered protocol family 1
[ 47.278525] Using IPI No-Shortcut mode
[ 47.278635] registered taskstats version 1
[ 47.278956] Magic number: 4:623:445
[ 47.279205] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 47.279213] EDD information not available.
[ 47.280665] Freeing unused kernel memory: 364k freed
[ 49.187741] fuse init (API version 7.9)
[ 51.035611] usbcore: registered new interface driver usbfs
[ 51.035699] usbcore: registered new interface driver hub
[ 51.067493] usbcore: registered new device driver usb
[ 51.298267] SCSI subsystem initialized
[ 51.383372] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 51.383498] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 51.383512] 8139cp 0000:00:0e.0: Try the "8139too" driver instead.
[ 51.435327] 8139too Fast Ethernet driver 0.9.28
[ 51.446316] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 51.446329] PCI: setting IRQ 9 as level-triggered
[ 51.446338] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 51.447559] eth0: RealTek RTL8139 at 0x1400, 00:e0:00:00:1e:75, IRQ 9
[ 51.447570] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 51.495322] USB Universal Host Controller Interface driver v3.0
[ 51.495557] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 51.495594] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 51.496276] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 51.496331] uhci_hcd 0000:00:04.2: irq 9, io base 0x00001000
[ 51.496874] usb usb1: configuration #1 chosen from 1 choice
[ 51.496981] hub 1-0:1.0: USB hub found
[ 51.497009] hub 1-0:1.0: 2 ports detected
[ 51.995259] Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
[ 52.063063] libata version 3.00 loaded.
[ 52.263194] ata_piix 0000:00:04.1: version 2.12
[ 52.286987] scsi0 : ata_piix
[ 52.297479] scsi1 : ata_piix
[ 52.297632] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1050 irq 14
[ 52.297644] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1058 irq 15
[ 52.655224] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 52.655249] ata1.00: ATA-7: MAXTOR STM380215A, 3.AAD, max UDMA/100
[ 52.655260] ata1.00: 156301488 sectors, multi 16: LBA48
[ 52.699598] ata1.00: configured for UDMA/33
[ 53.019114] ata2.00: ATAPI: LITE-ON DVDRW SHW-1635S, YP40, max UDMA/66
[ 53.191052] ata2.00: configured for UDMA/33
[ 53.191505] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380215 3.AA PQ: 0 ANSI: 5
[ 53.192867] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHW-1635S YP40 PQ: 0 ANSI: 5
[ 54.027305] Driver 'sd' needs updating - please use bus_type methods
[ 54.034524] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 54.034596] sd 0:0:0:0: [sda] Write Protect is off
[ 54.034609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 54.034719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 54.034931] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 54.034994] sd 0:0:0:0: [sda] Write Protect is off
[ 54.035005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 54.035112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 54.035130] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 54.077691] sda5 >
[ 54.078048] sd 0:0:0:0: [sda] Attached SCSI disk
[ 54.110399] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 54.110417] Uniform CD-ROM driver Revision: 3.20
[ 54.110583] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 54.129654] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 54.129738] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 54.802385] Attempting manual resume
[ 54.802400] swsusp: Resume From Partition 8:5
[ 54.802408] PM: Checking swsusp image.
[ 54.818411] PM: Resume from disk failed.
[ 54.941928] kjournald starting. Commit interval 5 seconds
[ 54.941969] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.010150] floppy0: no floppy controllers found
[ 66.521782] Linux agpgart interface v0.102
[ 66.587743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 66.962381] agpgart: Detected an Intel 440BX Chipset.
[ 66.969715] agpgart: AGP aperture is 64M @ 0xf8000000
[ 67.034452] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 67.118813] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
[ 67.194708] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 67.662069] Linux video capture interface: v2.00
[ 67.871874] Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
[ 69.093553] saa7146: register extension 'dvb'.
[ 69.095970] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 69.095983] PCI: setting IRQ 11 as level-triggered
[ 69.095993] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 69.096075] saa7146: found saa7146 @ mem d08ce400 (revision 1, irq 11) (0x13c2,0x000e).
[ 69.671396] input: Power Button (FF) as /devices/virtual/input/input2
[ 69.699701] ACPI: Power Button (FF) [PWRF]
[ 69.726138] udev: renamed network interface eth0 to eth1
[ 69.978600] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 70.884918] floppy0: no floppy controllers found
[ 71.279652] parport_pc 00:05: reported by Plug and Play ACPI
[ 71.279754] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 73.284163] NET: Registered protocol family 10
[ 73.285168] lo: Disabled Privacy Extensions
[ 79.119220] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3)
[ 79.155368] adapter has MAC addr = 00:d0:5c:08:a2:f3
[ 79.538145] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
[ 79.538163] dvb-ttpci: firmware @ card 0 supports CI link layer interface
[ 79.614234] dvb-ttpci: Crystal audio DAC @ card 0 detected
[ 79.615399] saa7146_vv: saa7146 (0): registered device video0 [v4l2]
[ 79.615477] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
[ 80.570714] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 80.571087] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:12.0/input/input3
[ 80.593800] dvb-ttpci: found av7110-0.
[ 80.595928] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 80.595942] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 80.812387] gameport: CS46xx Gameport is pci0000:00:06.0/gameport0, speed 1754kHz
[ 82.177628] lp0: using parport0 (interrupt-driven).
[ 82.402519] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
[ 83.094146] EXT3 FS on sda1, internal journal
[ 84.056555] eth1: no IPv6 routers present
[ 85.594525] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 90.582690] No dock devices found.
[ 94.210789] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 94.210808] apm: overridden by ACPI.
[ 94.503680] ppdev: user-space parallel port driver
[ 94.677786] audit(1353094062.778:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4848 profile="/usr/sbin/cupsd" namespace="default"
[ 98.262455] Bluetooth: Core ver 2.11
[ 98.265271] NET: Registered protocol family 31
[ 98.265286] Bluetooth: HCI device and connection manager initialized
[ 98.265300] Bluetooth: HCI socket layer initialized
[ 98.427371] Bluetooth: L2CAP ver 2.9
[ 98.427389] Bluetooth: L2CAP socket layer initialized
[ 98.534411] Bluetooth: RFCOMM socket layer initialized
[ 98.536512] Bluetooth: RFCOMM TTY layer initialized
[ 98.536528] Bluetooth: RFCOMM ver 1.8
[ 100.983465] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 101.006964] flexcop-pci: will use the HW PID filter.
[ 101.007037] flexcop-pci: card revision 2
[ 101.010535] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 101.023183] DVB: registering new adapter (FlexCop Digital TV device)
[ 101.027663] b2c2-flexcop: MAC address = 00:d0:d7:0d:d5:b1
[ 101.030502] b2c2-flexcop: i2c master_xfer failed
[ 101.231222] b2c2-flexcop: i2c master_xfer failed
[ 101.374657] b2c2-flexcop: found the mt352 at i2c address: 0x0f
[ 101.374681] DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
[ 101.374803] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 101.673145] lirc_dev: IR Remote Control driver registered, major 61
root@vdr-desktop:~#

ragno eccoti il dmesg,io parlavo di firmware perche all'avvio se ricordi la ss1 da un lampo a tv cioe viene caricata la scheda,ora non lo fa piu'.....

grazie.
SoGo
Messaggi: 737
Iscritto il: 19 gen 2007, 21:36

Re: Technotrend 2.3 Premium non carica piu' firmware

Messaggio da SoGo »

okey,mia figlia mi ha dato 10 minuti di tregua...ho cambiato il firmware in /lib/firmware ed ho messo dvb-ttpci-01.fw-261f Firmware 01.261f ed ha rifunzionato....dopo di che ho rimesso quello che avevo prima e rifunge nuovamente....miseri della fede!!!!????....anche perche' ho letto sia il dmesg del vdr funzionante e sia quello non funzionante ed erano praticamente uguali....
Avatar utente
ragno
Messaggi: 3017
Iscritto il: 20 gen 2007, 09:43
Località: Marte e dintorni
Contatta:

Re: Technotrend 2.3 Premium non carica piu' firmware

Messaggio da ragno »

Bene cosi. :)

Codice: Seleziona tutto

[ 79.119220] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3)
[ 79.155368] adapter has MAC addr = 00:d0:5c:08:a2:f3
[ 79.538145] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
[ 79.538163] dvb-ttpci: firmware @ card 0 supports CI link layer interface
[ 79.614234] dvb-ttpci: Crystal audio DAC @ card 0 detected
[ 79.615399] saa7146_vv: saa7146 (0): registered device video0 [v4l2]
[ 79.615477] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
[ 80.570714] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 80.571087] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:12.0/input/input3
[ 80.593800] dvb-ttpci: found av7110-0.
La scheda e' correttamente individuata.
Quando una scheda FF ha problemi con l'eeprom "vedi" solo il saa7146 ma nulla di tutto il resto.

Per la verita' ho pure dato un'indicazione errata, in quanto il firmware come giustamente indicavi, viene caricato nella FF (c'e' quello patchato per la esseci).

ciao

p.s. visto che ne ho parlato posto fix_eprom.c per i posteri (bei tempi quelli :) ).

Codice: Seleziona tutto

/*
 * fix_eeprom.c: Tool to fix bad subsystem ids for the SAA7146 based cards 
 *
 * Copyright (C) 2005-2007 Oliver Endriss <o.endriss@gmx.de>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * 
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
 * 
 *
 * Revision History:
 * -----------------
 * 25jul2007  En  1.0a  updated instructions for HG driver
 *
 */

/*
   *** DISCLAIMER - PLEASE READ ***
   This module will overwrite subsystem vendor and subsystem id in the EEPROM
   of a saa7146-based DVB card without any warning. Use on your own risk!
   The author will not be responsible for any damage caused by this program!
   You should not use this program unless you know what you are doing!

   *** ACHTUNG - ACHTUNG - ACHTUNG ***
   Dieses Programm überschreibt Subsystem-Vendor und Subsystem-ID im EEPROM
   der saa7146-basierten DVB-Karte. Sie verwenden dieses Programm auf eigene
   Gefahr! Der Autor haftet nicht für Schäden durch Anwendung des Programmes!
   Sie sollten dieses Programm nicht verwenden, es sei denn, Sie wissen genau,
   was Sie tun!


   Compilation:
   ------------
   Mercurial(HG) driver:
   - install driver for kernel 2.6.x
   - cd .../v4l
   - copy this file to the v4l directory
   - edit Makefile:
     add 'obj-m += fix_eeprom.o' at the end of the file
   - make
   
   dvb-kernel CVS driver (obsolete):
   - install dvb-kernel driver for kernel 2.6.x
   - cd .../build-2.6
   - copy this file to the build-2.6 directory
   - edit Makefile:
     add 'obj-m += fix_eeprom.o' after the last 'obj-m' line
   - make
   
   
   Usage (you have been warned!):
   ------------------------------
   - identify the subsystem of the broken card using 'lspci -vn'
     (assuming broken card has subsystem AAAA:BBBB)
   - insmod saa7146.ko
   - overwrite broken id:
     insmod fix_eeprom.ko old=0xAAAABBBB new=0xCCCCDDDD
         where CCCCDDDD is the new id to be written:
         CCCC - subsystem vendor, DDDD - subsystem id
     (ignore error message:
      error inserting 'fix_eeprom.ko': -1 Operation not permitted)
   - check your system log:
         *** using device 1131:7146 subsystem AAAA:BBBB ***
         *** eeprom - old id: AAAA:BBBB ***
         *** eeprom - writing new id CCCC:DDDD ***     
   - reboot
*/

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <media/saa7146.h>
#include "budget.h"

static int old;
static int new;
module_param(old, int, 0444);
module_param(new, int, 0444);
MODULE_PARM_DESC(old, "old (bad) subsystem-id");
MODULE_PARM_DESC(new, "new subsystem-id");

static struct i2c_adapter i2c_adap;


static int dev_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
	u8 subsys[10] = { 0x00 };
	struct i2c_msg msg_read[] = {
		{ .addr = 0x50, .flags = 0, .buf = subsys, .len = 1 },
                { .addr = 0x50, .flags = I2C_M_RD, .buf = subsys+1, .len = 4 } };
	struct i2c_msg msg_write[] = {
		{ .addr = 0x50, .flags = 0, .buf = subsys, .len = 5 } };


	if (dev->pci->subsystem_vendor == ((old >> 16) & 0xffff) &&
	    dev->pci->subsystem_device == (old & 0xffff)) {
		printk("*** using device %04x:%04x subsystem %04x:%04x ***\n",
			dev->pci->vendor, dev->pci->device,
			dev->pci->subsystem_vendor, dev->pci->subsystem_device);
	
		i2c_adap.class = I2C_CLASS_TV_DIGITAL;
		saa7146_i2c_adapter_prepare(dev, &i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120);
		i2c_add_adapter(&i2c_adap);

		i2c_transfer(&i2c_adap, msg_read, 2);

		printk("*** eeprom - old id: %02x%02x:%02x%02x ***\n",
			subsys[3], subsys[4], subsys[1], subsys[2]);

		subsys[1] = (new >> 8) & 0xff;
		subsys[2] = new & 0xff;
		subsys[3] = (new >> 24) & 0xff;
		subsys[4] = (new >> 16) & 0xff;

		if (new != 0) {
			if (subsys[3] == 0 && subsys[4] == 0)
				printk("*** invalid new id: %02x%02x:%02x%02x ***\n",
					subsys[3], subsys[4], subsys[1], subsys[2]);
	 	      	else {
				printk("*** eeprom - writing new id %02x%02x:%02x%02x ***\n",
					subsys[3], subsys[4], subsys[1], subsys[2]);
				i2c_transfer(&i2c_adap, msg_write, 1);
			}
		}

		i2c_del_adapter(&i2c_adap);
	}

	return -1;
}

static int dev_detach(struct saa7146_dev *dev)
{
	printk("%s\n", __FUNCTION__);

	return 0;
}


static struct saa7146_extension budget_extension;

MAKE_BUDGET_INFO(xxx, "SAA7146 PCI", 0);

static struct pci_device_id pci_tbl[] = {
	MAKE_EXTENSION_PCI(xxx,  PCI_ANY_ID, PCI_ANY_ID),
	{
		.vendor    = 0,
	}
};

MODULE_DEVICE_TABLE(pci, pci_tbl);

static struct saa7146_extension budget_extension = {
	.name		= "fix eeprom\0",
	.flags	 	= 0,
	
	.module		= THIS_MODULE,
	.pci_tbl	= pci_tbl,
	.attach		= dev_attach,
	.detach		= dev_detach,
};	

static int __init fix_init(void) 
{
	saa7146_register_extension(&budget_extension);
	saa7146_unregister_extension(&budget_extension); 
	return -1;
}

static void __exit fix_exit(void)
{
	printk("%s\n", __FUNCTION__);

	saa7146_unregister_extension(&budget_extension); 
}

module_init(fix_init);
module_exit(fix_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Oliver Endriss");
MODULE_DESCRIPTION("Tool to fix broken subsystem ids for the SAA7146 based cards, rev 1.0a");

vdr: 1.4.7+extpatch54 (pensionata), 1.7.27 (yavdr 0.4)
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.

E quando penso che sia finita,
è proprio allora che comincia la salita.
SoGo
Messaggi: 737
Iscritto il: 19 gen 2007, 21:36

Re: Technotrend 2.3 Premium non carica piu' firmware

Messaggio da SoGo »

Grazie ragno...bei tempi davvero...e poi io ancora uso la ss1....sono posterato :D :D
ma non ho ancora capito che caxxo aveva la ss1....bhooo comunque ora funge l'ho pure lasciata accesa un bel po di ore domenica e non ha dato nessun problema....
Rispondi