technotrend s3200 & multiproto
Moderatori: ragno, tapino, alez, zulu, davidea
technotrend s3200 & multiproto
Ciao a tutti, googolando e googolando in giro sono arrivato anch'io a questo forum, vi saluto e vi pongo subito le prime domande
Sulla mia gentoo a 64 bit sto cercando in tutti i modi di installare la scheda sat...sto seguendo questa guida http://skerit.kipdola.com/?p=5&language=en e in effetti le cose sembravano andare bene fino a quando ho realizzato che i moduli stb6100 e stb0899 non vengono caricati, ho guardato in giro e il problema sembra essere stato risolto in questa discussione, ma non ho ben chiari i procedimenti che ne stanno alla base
http://www.mail-archive.com/linux-dvb@l ... 26506.html, Voi.... che dovreste essere i massimi esperti in materia , non è che riuscite a farmi installare questa benedetta scheda tv sat su linux?
Poi ho già visto che, anche se hard masked, posso installare vdr facilmente con paludis, quindi una volta fatti riconoscere scheda e lnb, poi chiederò consigli per l'installazione di vdr e sulla sua configurazione....... ringrazio anticipatamente tutti...
Sulla mia gentoo a 64 bit sto cercando in tutti i modi di installare la scheda sat...sto seguendo questa guida http://skerit.kipdola.com/?p=5&language=en e in effetti le cose sembravano andare bene fino a quando ho realizzato che i moduli stb6100 e stb0899 non vengono caricati, ho guardato in giro e il problema sembra essere stato risolto in questa discussione, ma non ho ben chiari i procedimenti che ne stanno alla base
http://www.mail-archive.com/linux-dvb@l ... 26506.html, Voi.... che dovreste essere i massimi esperti in materia , non è che riuscite a farmi installare questa benedetta scheda tv sat su linux?
Poi ho già visto che, anche se hard masked, posso installare vdr facilmente con paludis, quindi una volta fatti riconoscere scheda e lnb, poi chiederò consigli per l'installazione di vdr e sulla sua configurazione....... ringrazio anticipatamente tutti...
Re: technotrend s3200 & multiproto
ciao!
Il thread della ML postato e' vecchio, quindi le eventuali correzioni dovrebbero gia essere integrate il tree hg. Comunque basta dare un'occhiata ai sorgenti...
Non ho una conoscenza specifica di gentoo, ma magari e' un problema subdolo: hai provato a caricare manualmente i driver?
ciao
Il thread della ML postato e' vecchio, quindi le eventuali correzioni dovrebbero gia essere integrate il tree hg. Comunque basta dare un'occhiata ai sorgenti...
Non ho una conoscenza specifica di gentoo, ma magari e' un problema subdolo: hai provato a caricare manualmente i driver?
ciao
vdr: 1.4.7+extpatch54 (pensionata), 1.7.27 (yavdr 0.4)
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.
E quando penso che sia finita,
è proprio allora che comincia la salita.
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.
E quando penso che sia finita,
è proprio allora che comincia la salita.
Re: technotrend s3200 & multiproto
si si ho provato, ma proprio non me li carica......
Re: technotrend s3200 & multiproto
sto riprovando, però dubito si risolva qualcosa..... sto usando il kernel 2.6.24-r7, dite che può essere un problema di kernel? Solo io non riesco ad installare la technotrend su linux? possibile?
Re: technotrend s3200 & multiproto
Allora novità, ho ricompilato i driver e adesso se lancio modprobe per ogni modulo non ricevo errori, però dando un dmesg ottengo questo...
DVB: registering new adapter (TT-Budget S2-3200 PCI)
usbcore: registered new interface driver snd-usb-audio
input: USB OpticalWheel Mouse as /class/input/input4
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Couldn't read from EEPROM: not there?
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input5
stb0899_write_regs: Reg=[0xf1b6], Data=[0x02 ...], Count=1, Status=-1
_stb0899_read_reg: Read error, Reg=[0xf000], Status=-1
stb0899_get_dev_id: Device ID=[15], Release=[15]
_stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Status=-1
_stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Status=-1
stb0899_get_dev_id: Demodulator Core ID=[ÿÿÿÿ], Version=[-1]
_stb0899_read_s2reg ERR(1), Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Status=-1
_stb0899_read_s2reg ERR(1), Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Status=-1
stb0899_get_dev_id: FEC Core ID=[ÿÿÿÿ], Version=[-1]
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
frontend_init: No LNBP21 found!
budget-ci: A frontend driver was not found for device 1131/7146 subsystem 13c2/1019
prima però ricevevo errore dando modprobe stb0899 ad esempio, adesso no....
ovviamente se dò
tux scan # ./scan -t 1 -s 1 dvb-s/Astra-19.2E > ~/.szap/channels.conf
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2461: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory , e se provo a creare le directory ricevo invece " no such device"
Ho un lnb dual feed, puntato su hotbird 13.0 e astra 19.2
DVB: registering new adapter (TT-Budget S2-3200 PCI)
usbcore: registered new interface driver snd-usb-audio
input: USB OpticalWheel Mouse as /class/input/input4
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Couldn't read from EEPROM: not there?
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input5
stb0899_write_regs: Reg=[0xf1b6], Data=[0x02 ...], Count=1, Status=-1
_stb0899_read_reg: Read error, Reg=[0xf000], Status=-1
stb0899_get_dev_id: Device ID=[15], Release=[15]
_stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Status=-1
_stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Status=-1
stb0899_get_dev_id: Demodulator Core ID=[ÿÿÿÿ], Version=[-1]
_stb0899_read_s2reg ERR(1), Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Status=-1
_stb0899_read_s2reg ERR(1), Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Status=-1
stb0899_get_dev_id: FEC Core ID=[ÿÿÿÿ], Version=[-1]
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
frontend_init: No LNBP21 found!
budget-ci: A frontend driver was not found for device 1131/7146 subsystem 13c2/1019
prima però ricevevo errore dando modprobe stb0899 ad esempio, adesso no....
ovviamente se dò
tux scan # ./scan -t 1 -s 1 dvb-s/Astra-19.2E > ~/.szap/channels.conf
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2461: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory , e se provo a creare le directory ricevo invece " no such device"
Ho un lnb dual feed, puntato su hotbird 13.0 e astra 19.2
Re: technotrend s3200 & multiproto
Niente, ci rinuncio, le ho provate davvero tutte ma proprio sembra impossibile installare correttamente sta scheda, peccato....... I'm back to windows...