Problemi plugin Mplayer

[Gringo]

Ciao a tutti,
sono riuscito ad installare il plugin in oggetto e a configurare le varie fonti ma ogni volta che avvio VDR mi compare questi messaggio:

Codice: Seleziona tutto

sources: filesource /video/multimedia/video has no includes set
sources: filesource /video/multimedia/video/DVD-VCD has no includes set
sources: filesource /mnt/cdrom has no includes set
status: volume=145 mute=0

Il mio mplayersources.conf è:

Codice: Seleziona tutto

/video/multimedia/video;Video VDRBox;0
/video/multimedia/video/DVD-VCD/;SVCD DVD;0
/mnt/cdrom;Lettore DVD;1

1) Cosa vuol dire?
2) Come faccio in modo che non venga più mostrato a video?

Poi, quando riproduco un file (DVD, MPEG, etc) mi compare una cosa simile a questa:

Codice: Seleziona tutto

logger: *** Starting mplayer.sh Version 0.8.7
logger: *** DEBUG: Variable CFGFIL has value "/usr/bin/mplayer.sh.conf"
logger: *** Use Option USERDEF at your own risk!
logger: *** INFO: Source Video has Resolution of 352 x 240 ...
logger: *** INFO: For Sqare Pixels we would scale to 384 x 261 ...
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (Family: 15, Model: 2, Stepping: 7)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
115 audio & 237 video codecs

PLAYING /video/multimedia/video/video.mpg

MPEG-PS file format detected.
VIDEO:  MPEG1  352x240  (aspect 12)  29.970 fps  1537.2 kbps (192.2 kbyte/s)
Opening /dev/dvb/adapter0/video0+audio0
Opening video filter: [lavc=5000:25]
Opening video filter: [expand w=352 h=288 x=-1 y=-1 osd=1]
Expand: 352 x 288, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [detc=dr=2:am=1]
Opening video filter: [scale w=352 h=261]
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred colorspace: Mpeg PES)
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 224.0 kbit/15.87% (ratio: 28000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Opening /dev/dvb/adapter0/audio0
[AO MPEGPES] 45863 Hz not supported, try to resample.
AO: [mpegpes] 48000Hz 2ch s16be (2 bytes per sample)
PLAYBACK STARTED
mplayer: slave cmd: volume 81 1
mplayer: volume=81 mpVolume=81 mpMute=0
mplayer: slave cmd: get_time_length
mplayer: slave cmd: get_percent_pos
VDec: vo config request - 352 x 240 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.30:1 - prescaling to correct movie aspect.
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 5 -> 4
SwScaler: reducing / aligning filtersize 5 -> 4
[swscaler @ 0x8998570]SwScaler: BICUBIC scaler, from yuv420p to yuv420p using MMX2
[swscaler @ 0x8998570]SwScaler: using 4-tap MMX scaler for horizontal luminance scaling
[swscaler @ 0x8998570]SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling
[swscaler @ 0x8998570]SwScaler: using n-tap MMX scaler for vertical scaling (YV12 like)
[swscaler @ 0x8998570]SwScaler: 352x240 -> 352x262
[mpeg1video @ 0x899d4d0]removing common factors from framerate
VO: [mpegpes] 352x288 => 352x296 Mpeg PES 
mplayer: slave cmd: get_time_length
mplayer: slave cmd: get_percent_pos
status: volume=145 mute=1
mplayer: slave cmd: mute
mplayer: volume=81 mpVolume=81 mpMute=1

3) Come faccio in modo che non compaia a video?

4) Ho impostato l'uso di MPlayer tramite scheda Nexus (Premium) ma l'uso della CPU è di circa 40 % per quel video.
E' normale? Non doveva essere inferiore (circa 4-5%) visto che la decodifica la fa il decoder della scheda sat?

PS: il pc è un Pentium 4 2.4 GHz che gira a 1.2 GHz tramite l'utility 'cpufreq'.

Grazie a chi vorrà aiutarmi.

[ragno]

@Gringo:

> 4)...

Controlla di avere questa impstazione in mplayer.sh.conf
MPEG_DIRECT="true"

Tieni presente che se il video non e' di dimensioni standard, deve essere riscacalato via software da mplayer...

[Gringo]

Tanto per toglierci il dubbio, questo è il mio file conf:

Codice: Seleziona tutto

# Config File for mplayer.sh ...
#
# $Id: mplayer.sh.conf,v 1.24.2.3 2007/02/11 15:19:35 juri Exp $
#
# ***
# *** Mandatory Values 
# *** 
#
# Where to find mplayer executable ?
# it must be the full path *including* the binary, e.g.
# MPLAYER="/usr/bin/mplayer"
# or just the name of the binary, e.g.:
# MPLAYER="mplayer"
MPLAYER="/usr/bin/mplayer"

# Video Out Filter lavc or fame - see mplayer DVB docs for details !
#VOP="lavc=9000"
VOP="lavc=5000"

# Video out device
# most users will want the default of 'mpegpes', but users with a dxr3
# need to use 'dxr3', or users using softdevice might need 'dfbmga'
# If the DVB card with the MPEG decoder is not the first device as seen
# by the drivers/VDR, then you have to specify which card it actually is.
# Do so with 'mpegpes:card=X', where X is the card number (see also AO)
#VO="dxr3"
#VO="dfbmga"
VO="mpegpes:card=1"
#VO="mpegpes"

# Audio output device and possible additional options
# most users will want the default of 'mpegpes', but users with a dxr3
# need to use 'oss:/dev/em8300_ma-0'
# users using softdevice might want to use 'oss' or 'alsa'
# If the DVB card with the MPEG decoder is not the first device as seen
# by the drivers/VDR, then you have to specify which card it actually is.
# Do so with 'mpegpes:card=X', where X is the card number (see also VO)
#AO="oss:/dev/em8300_ma-0"
#AO="alsa"
AO="mpegpes:card=1"
#AO="mpegpes"

# X-Resolutions for the DVBs card (smallest value first!)
#
XResPAL=(352480528544704720)
XResNTSC=(352480512544640704720)

# Set the following to 'true' or 'false' according to
# the capabilities of your TV set.
#
# In case of NTSC="false", see also DETC_FILTER below
#
# At least _one_ has to be true!
# If your TV can do both, I strongly recommend to keep both set to "true"!
PAL="true"
#NTSC="true"

# Use mplayer's -speed option for videos with a different
# frames/s value than the selected TV norm
#
# this setting is only used if either PAL or NTSC
# is set to false!
USE_SPEED="true"

# set to true if you want to use AC3 output
USEAC3="false"

# how to play AC3 audio?
# for AC3 via sound card (ALSA driver):
AC3AOUT="-ao alsa9 -ac hwac3"
# for AC3 via DVB (doesn't need AC3overDVB patch);
# needs MPlayer 0.90 final, or newer:
#AC3AOUT="-ac hwac3"

# what aspect ratio has your TV set?
# either 4/3 (conventional) or 16/9 (widescreen)
#TV_ASPECT="16/9"
TV_ASPECT="4/3"

# ***
# *** Optional Setting *** Simply Remove them if they do not fit your needs...
# ***

# What detelecinig filter should we use to play NTSC material as PAL?
# This is only used if you have set NTSC to false and PAL to true.
# If you use MPlayer versions 1.0 or higher I recommend to use the
# following setting "ivtc=1", but this is not supported by MPlayer 0.9x
#DETC_FILTER="ivtc=1"
DETC_FILTER="detc=dr=2:am=1"

# What version of MPlayer do you have?
# if you have 0.9x then choose 'false'
# if you have 1.0(pre) then choose 'true'
MPLAYER_V1="true"

# Cache Option for MPlayer
CACHE="4096"

# Framedrop
FRAMEDROP="true"

# Lirc RC File
#LIRCRC="/video/.lircrc"

# do we have a slow CPU?
# if so, reduce the Y resolution to the half of the possible maximum:
# NTSC: 240
# PAL: 288
# uncomment the following line if you have a slow CPU:
#SLOW_CPU="true"

# Where to find DVD/VCD dummy files? (just a fake and empty text file for the plugin)
# Example: create two empty text files (DVD and VCD) in /video/plugins/DVD-VCD/
# !!!The files must be named VCD and DVD (all capital letters)!!!
#DVDFiles="/video/plugins/DVD-VCD"
DVDFiles="/video/multimedia/video/DVD-VCD"

# What is your DVD-ROM device ?
DVD="/dev/dvd"

# What languages do your DVD's use ?
DVDLANG="it"

# extra DVD options
#DVDOPTIONS="-af volume=+10"

# extra VCD options
VCDOPTIONS=""

# should MPEG files be played directly (without rescaling) if possible?
MPEG_DIRECT="true"

#Subtitle options
SUBPOS="80"#Vertical position 0-100
SUBCOLOR="0"#Background color 0=black 255=white
SUBALPHA="30"#Background transparency (0-255)

# Userdefined Options - make sure they do not collide with options
# used in mplayer.sh
# Only for experienced users
# USERDEF="-what -option you ever -like to give -to mplayer"
USERDEF="-quiet"
#USERDEF=""

# set to true to enable debugging output
#DEBUG="true"

# End of Options