VDR-HD con SkystarHD con decodifica via software

[fabiobtr]

Caro snam11

Sono in attesa del tuo resoconto perchè sono tale e quale alle tue medesime condizioni, se hai tempo potresti quantomento farmi capire qual'è il problema e come risolverlo?

Ciao

[magnetepazzo]

cp: `./PLUGINS/lib/libvdr-hello.so.1.7.0' e `./PLUGINS/lib/libvdr-hello.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-osddemo.so.1.7.0' e `./PLUGINS/lib/libvdr-osddemo.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-pictures.so.1.7.0' e `./PLUGINS/lib/libvdr-pictures.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-skincurses.so.1.7.0' e `./PLUGINS/lib/libvdr-skincurses.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-sky.so.1.7.0' e `./PLUGINS/lib/libvdr-sky.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-status.so.1.7.0' e `./PLUGINS/lib/libvdr-status.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-svccli.so.1.7.0' e `./PLUGINS/lib/libvdr-svccli.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-svcsvr.so.1.7.0' e `./PLUGINS/lib/libvdr-svcsvr.so.1.7.0' sono lo stesso file
cp: `./PLUGINS/lib/libvdr-svdrpdemo.so.1.7.0' e `./PLUGINS/lib/libvdr-svdrpdemo.so.1.7.0' sono lo stesso file
make: *** [install-plugins] Error 1
aiutoooooo

[il_presid3]

hehe grazie per aver postato il tutto, visto che io ero a bighellonare in giro oggi hihihi, però ho fatto anche una mod nel file config_xineliboutput che è in /home/nomeutente/.xine/ ... per chi vuole fare delle provole lo posto quì

#
# xine config file
#
.version:2

# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.

# Use unscaled OSD
# bool, default: 0
#gui.osd_use_unscaled:0

# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
#ui.osd.text_palette:white-black-transparent

# notify changes to the hardware mixer
# bool, default: 1
#audio.alsa_hw_mixer:1

# use A/52 dynamic range compression
# bool, default: 0
#audio.a52.dynamic_range:0

# downmix audio to 2 channel surround stereo
# bool, default: 0
#audio.a52.surround_downmix:0

# A/52 volume
# [0..200], default: 100
#audio.a52.level:100

# device used for mono output
# string, default: default
#audio.device.alsa_default_device:default

# device used for stereo output
# string, default: plug:front:default
audio.device.alsa_front_device:default

# alsa mixer device
# string, default: PCM
#audio.device.alsa_mixer_name:PCM

# sound card can do mmap
# bool, default: 0
#audio.device.alsa_mmap_enable:0

# device used for 5.1-channel output
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
#audio.device.alsa_passthrough_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

# device used for 4-channel output
# string, default: plug:surround40:0
#audio.device.alsa_surround40_device:plug:surround40:0

# device used for 5.1-channel output
# string, default: plug:surround51:0
#audio.device.alsa_surround51_device:plug:surround51:0

# speaker arrangement
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
audio.output.speaker_arrangement:Stereo 2.1

# offset for digital passthrough
# numeric, default: 0
#audio.synchronization.passthrough_offset:0

# play audio even on slow/fast speeds
# bool, default: 0
#audio.synchronization.slow_fast_audio:0

# method to sync audio and video
# { metronom feedback resample }, default: 0
audio.synchronization.av_sync_method:resample

# always resample to this rate (0 to disable)
# numeric, default: 0
#audio.synchronization.force_rate:0

# enable resampling
# { auto off on }, default: 0
#audio.synchronization.resample_mode:auto

# startup audio volume
# [0..100], default: 50
#audio.volume.mixer_volume:50

# restore volume level at startup
# bool, default: 0
#audio.volume.remember_volume:0

# pitch alignment workaround
# bool, default: 0
#video.device.xv_pitch_alignment:0

# video display method preference
# { Any Overlay Textured Video Blitter }, default: 0
#video.device.xv_preferred_method:Any

# Xv port number
# numeric, default: 0
#video.device.xv_port:0

# enable vblank sync
# bool, default: 1
#video.device.xv_sync_to_vblank:1

# disable exact alpha blending of overlays
# bool, default: 0
#video.output.disable_exact_alphablend:0

# disable all video scaling
# bool, default: 0
#video.output.disable_scaling:0

# horizontal image position in the output window
# [0..100], default: 50
#video.output.horizontal_position:50

# vertical image position in the output window
# [0..100], default: 50
#video.output.vertical_position:50

# Choose speed over specification compliance
# bool, default: 0
video.processing.ffmpeg_choose_speed_over_accuracy:1

# MPEG-4 postprocessing quality
# [0..6], default: 3
video.processing.ffmpeg_pp_quality:0

# Skip loop filter
# { default none nonref bidir nonkey all }, default: 0
video.processing.ffmpeg_skip_loop_filter:all

# FFmpeg video decoding thread count
# numeric, default: 1
video.processing.ffmpeg_thread_count:2

# Fast (low-quality) OSD scaling
# bool, default: 0
#input.xvdr.fast_osd_scaling:0

# device used for CD audio
# string, default: /dev/cdrom
#media.audio_cd.device:/dev/cdrom

# slow down disc drive to this speed factor
# numeric, default: 4
#media.audio_cd.drive_slowdown:4

# query CDDB
# bool, default: 1
#media.audio_cd.use_cddb:1

# CDDB server port
# numeric, default: 8880
#media.audio_cd.cddb_port:8880

# CDDB server name
# string, default: freedb.freedb.org
#media.audio_cd.cddb_server:freedb.freedb.org

# directory for saving streams
# string, default:
#media.capture.save_dir:

# Number of dvb card to use.
# numeric, default: 0
#media.dvb.adapter:0

# Remember last DVB channel watched
# bool, default: 1
#media.dvb.remember_channel:1

# Number of seconds until tuning times out.
# numeric, default: 0
#media.dvb.tuning_timeout:0

# Enable the DVB GUI
# bool, default: 1
#media.dvb.gui_enabled:1

# Last DVB channel viewed
# numeric, default: -1
#media.dvb.last_channel:-1

# default language for DVD playback
# string, default: en
#media.dvd.language:en

# region the DVD player claims to be in (1 to
# numeric, default: 1
#media.dvd.region:1

# device used for DVD playback
# string, default: /dev/dvd
#media.dvd.device:/dev/dvd

# read-ahead caching
# bool, default: 1
#media.dvd.readahead:1

# play mode when title/chapter is given
# { entire dvd one chapter }, default: 0
#media.dvd.play_single_chapter:entire dvd

# unit for seeking
# { seek in program chain seek in program }, default: 0
#media.dvd.seek_behaviour:seek in program chain

# unit for the skip action
# { skip program skip part skip title }, default: 0
#media.dvd.skip_behaviour:skip program

# file browsing start location
# string, default: /home/vdrbox
#media.files.origin_path:/home/vdrbox

# list hidden files
# bool, default: 0
#media.files.show_hidden_files:0

# network bandwidth
# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) }, default: 10

# Timeout for network stream reading (in seconds)
# numeric, default: 30
#media.network.timeout:30

# Domains for which to ignore the HTTP proxy
# string, default:
#media.network.http_no_proxy:

# HTTP proxy host
# string, default:
#media.network.http_proxy_host:

# HTTP proxy password
# string, default:
#media.network.http_proxy_password:

# HTTP proxy port
# numeric, default: 80
#media.network.http_proxy_port:80

# HTTP proxy username
# string, default:
#media.network.http_proxy_user:

# MMS protocol
# { auto TCP HTTP }, default: 0
#media.network.mms_protocol:auto

# automatically advance VCD track/entry
# bool, default: 1
#media.vcd.autoadvance:1

# VCD default type to use on autoplay
# { MPEG track entry segment playback-control item }, default: 3
#media.vcd.autoplay:playback-control item

# device used for VCD playback
# string, default: /dev/cdrom
#media.vcd.device:/dev/cdrom

# VCD position slider range
# { auto track entry }, default: 0
#media.vcd.length_reporting:auto

# show 'rejected' VCD LIDs
# bool, default: 0
#media.vcd.show_rejected:0

# VCD format string for stream comment field
# string, default: %P - Track %T
#media.vcd.comment_format:%P - Track %T

# VCD debug flag mask
# numeric, default: 0
#media.vcd.debug:0

# VCD format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A

# v4l ALSA audio input device
# string, default: plughw:0,0
#media.video4linux.audio_device:plughw:0,0

# v4l radio device
# string, default: /dev/radio0
#media.video4linux.radio_device:/dev/radio0

# v4l video device
# string, default: /dev/video0
#media.video4linux.video_device:/dev/video0

# v4l TV standard
# { AUTO PAL NTSC SECAM OLD }, default: 0
#media.video4linux.tv_standard:AUTO

# device used for WinTV-PVR 250/350 (pvr plugin)
# string, default: /dev/video0
#media.wintv_pvr.device:/dev/video0

# default VDR host
# string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
#media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block

# path to RealPlayer codecs
# string, default:
#decoder.external.real_codecs_path:

# path to Win32 codecs
# string, default: /usr/local/lib/win32
#decoder.external.win32_codecs_path:/usr/local/lib/win32

# opacity for the black parts of bitmapped subtitles
# [0..100], default: 67
#subtitles.bitmap.black_opacity:67

# opacity for the colour parts of bitmapped subtitles
# [0..100], default: 100
#subtitles.bitmap.colour_opacity:100

# subtitle size
# { tiny small normal large very large huge }, default: 1
#subtitles.separate.subtitle_size:small

# subtitle vertical offset
# numeric, default: 0
#subtitles.separate.vertical_offset:0

# font for subtitles
# string, default: sans
#subtitles.separate.font:sans

# encoding of the subtitles
# string, default: iso-8859-1
#subtitles.separate.src_encoding:iso-8859-1

# use unscaled OSD if possible
# bool, default: 1
#subtitles.separate.use_unscaled_osd:1

# frames per second to generate
# numeric, default: 14
#effects.goom.fps:14

# goom image height
# numeric, default: 240
#effects.goom.height:240

# goom image width
# numeric, default: 320
#effects.goom.width:320

# colour space conversion method
# { Fast but not photorealistic Slow but looks better }, default: 0
#effects.goom.csc_method:Fast but not photorealistic

# number of audio buffers
# numeric, default: 230
engine.buffers.audio_num_buffers:8

# number of video buffers
# numeric, default: 500
engine.buffers.video_num_buffers:500

# default number of video frames
# numeric, default: 15
engine.buffers.video_num_frames10

# priority for a/52 decoder
# numeric, default: 0
#engine.decoder_priorities.a/52:0

# priority for bitplane decoder
# numeric, default: 0
#engine.decoder_priorities.bitplane:0

# priority for dts decoder
# numeric, default: 0
#engine.decoder_priorities.dts:0

# priority for dvaudio decoder
# numeric, default: 0
#engine.decoder_priorities.dvaudio:0

# priority for faad decoder
# numeric, default: 0
#engine.decoder_priorities.faad:0

# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv8:0

# priority for ffmpeg-wmv9 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv9:0

# priority for ffmpegaudio decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegaudio:0

# priority for ffmpegvideo decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegvideo:0

# priority for gdkpixbuf decoder
# numeric, default: 0
#engine.decoder_priorities.gdkpixbuf:0

# priority for gsm610 decoder
# numeric, default: 0
#engine.decoder_priorities.gsm610:0

# priority for image decoder
# numeric, default: 0
#engine.decoder_priorities.image:0

# priority for mad decoder
# numeric, default: 0
#engine.decoder_priorities.mad:0

# priority for mpc decoder
# numeric, default: 0
#engine.decoder_priorities.mpc:0

# priority for mpeg2 decoder
# numeric, default: 0
engine.decoder_priorities.mpeg2:1

# priority for nsfdec decoder
# numeric, default: 0
#engine.decoder_priorities.nsfdec:0

# priority for pcm decoder
# numeric, default: 0
#engine.decoder_priorities.pcm:0

# priority for qta decoder
# numeric, default: 0
#engine.decoder_priorities.qta:0

# priority for qtv decoder
# numeric, default: 0
#engine.decoder_priorities.qtv:0

# priority for realadec decoder
# numeric, default: 0
#engine.decoder_priorities.realadec:0

# priority for realvdec decoder
# numeric, default: 0
#engine.decoder_priorities.realvdec:0

# priority for rgb decoder
# numeric, default: 0
#engine.decoder_priorities.rgb:0

# priority for spucc decoder
# numeric, default: 0
#engine.decoder_priorities.spucc:0

# priority for spucmml decoder
# numeric, default: 0
#engine.decoder_priorities.spucmml:0

# priority for spudec decoder
# numeric, default: 0
#engine.decoder_priorities.spudec:0

# priority for spudvb decoder
# numeric, default: 0
#engine.decoder_priorities.spudvb:0

# priority for sputext decoder
# numeric, default: 0
#engine.decoder_priorities.sputext:0

# priority for theora decoder
# numeric, default: 0
#engine.decoder_priorities.theora:0

# priority for vorbis decoder
# numeric, default: 0
#engine.decoder_priorities.vorbis:0

# priority for win32a decoder
# numeric, default: 0
#engine.decoder_priorities.win32a:0

# priority for win32v decoder
# numeric, default: 0
#engine.decoder_priorities.win32v:0

# priority for yuv decoder
# numeric, default: 0
#engine.decoder_priorities.yuv:0

# media format detection strategy
# { default reverse content extension }, default: 0
#engine.demux.strategy:default

# memcopy method used by xine
# { probe libc kernel mmx mmxext sse }, default: 0
engine.performance.memcpy_method:sse

# percentage of discarded frames to tolerate
# numeric, default: 10
#engine.performance.warn_discarded_threshold:10

# percentage of skipped frames to tolerate
# numeric, default: 10
#engine.performance.warn_skipped_threshold:10

# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0


Spero di aver fatto cosa gradita

mi permetto di segnalare due piccole modifiche

dopo averci perso quasi la mattinata con l'amico maidiremaik per capire come mai un file mkv con audio dts rendeva la riproduzione del video scattosa, commentando le seguenti linee tutto si è risolto

#engine.buffers.audio_num_buffers:8
#audio.output.speaker_arrangement: Stereo2.1

ah dimenticavo, questa config si può utilizzare anche con vdpau

byebye!

[francabis]

hehe grazie per aver postato il tutto, visto che io ero a bighellonare in giro oggi hihihi, però ho fatto anche una mod nel file config_xineliboutput che è in /home/nomeutente/.xine/ ... per chi vuole fare delle provole lo posto quì

#
# xine config file
#
.version:2

# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.

# Use unscaled OSD
# bool, default: 0
#gui.osd_use_unscaled:0

# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
#ui.osd.text_palette:white-black-transparent

# notify changes to the hardware mixer
# bool, default: 1
#audio.alsa_hw_mixer:1

# use A/52 dynamic range compression
# bool, default: 0
#audio.a52.dynamic_range:0

# downmix audio to 2 channel surround stereo
# bool, default: 0
#audio.a52.surround_downmix:0

# A/52 volume
# [0..200], default: 100
#audio.a52.level:100

# device used for mono output
# string, default: default
#audio.device.alsa_default_device:default

# device used for stereo output
# string, default: plug:front:default
audio.device.alsa_front_device:default

# alsa mixer device
# string, default: PCM
#audio.device.alsa_mixer_name:PCM

# sound card can do mmap
# bool, default: 0
#audio.device.alsa_mmap_enable:0

# device used for 5.1-channel output
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
#audio.device.alsa_passthrough_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

# device used for 4-channel output
# string, default: plug:surround40:0
#audio.device.alsa_surround40_device:plug:surround40:0

# device used for 5.1-channel output
# string, default: plug:surround51:0
#audio.device.alsa_surround51_device:plug:surround51:0

# speaker arrangement
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
audio.output.speaker_arrangement:Stereo 2.1

# offset for digital passthrough
# numeric, default: 0
#audio.synchronization.passthrough_offset:0

# play audio even on slow/fast speeds
# bool, default: 0
#audio.synchronization.slow_fast_audio:0

# method to sync audio and video
# { metronom feedback resample }, default: 0
audio.synchronization.av_sync_method:resample

# always resample to this rate (0 to disable)
# numeric, default: 0
#audio.synchronization.force_rate:0

# enable resampling
# { auto off on }, default: 0
#audio.synchronization.resample_mode:auto

# startup audio volume
# [0..100], default: 50
#audio.volume.mixer_volume:50

# restore volume level at startup
# bool, default: 0
#audio.volume.remember_volume:0

# pitch alignment workaround
# bool, default: 0
#video.device.xv_pitch_alignment:0

# video display method preference
# { Any Overlay Textured Video Blitter }, default: 0
#video.device.xv_preferred_method:Any

# Xv port number
# numeric, default: 0
#video.device.xv_port:0

# enable vblank sync
# bool, default: 1
#video.device.xv_sync_to_vblank:1

# disable exact alpha blending of overlays
# bool, default: 0
#video.output.disable_exact_alphablend:0

# disable all video scaling
# bool, default: 0
#video.output.disable_scaling:0

# horizontal image position in the output window
# [0..100], default: 50
#video.output.horizontal_position:50

# vertical image position in the output window
# [0..100], default: 50
#video.output.vertical_position:50

# Choose speed over specification compliance
# bool, default: 0
video.processing.ffmpeg_choose_speed_over_accuracy:1

# MPEG-4 postprocessing quality
# [0..6], default: 3
video.processing.ffmpeg_pp_quality:0

# Skip loop filter
# { default none nonref bidir nonkey all }, default: 0
video.processing.ffmpeg_skip_loop_filter:all

# FFmpeg video decoding thread count
# numeric, default: 1
video.processing.ffmpeg_thread_count:2

# Fast (low-quality) OSD scaling
# bool, default: 0
#input.xvdr.fast_osd_scaling:0

# device used for CD audio
# string, default: /dev/cdrom
#media.audio_cd.device:/dev/cdrom

# slow down disc drive to this speed factor
# numeric, default: 4
#media.audio_cd.drive_slowdown:4

# query CDDB
# bool, default: 1
#media.audio_cd.use_cddb:1

# CDDB server port
# numeric, default: 8880
#media.audio_cd.cddb_port:8880

# CDDB server name
# string, default: freedb.freedb.org
#media.audio_cd.cddb_server:freedb.freedb.org

# directory for saving streams
# string, default:
#media.capture.save_dir:

# Number of dvb card to use.
# numeric, default: 0
#media.dvb.adapter:0

# Remember last DVB channel watched
# bool, default: 1
#media.dvb.remember_channel:1

# Number of seconds until tuning times out.
# numeric, default: 0
#media.dvb.tuning_timeout:0

# Enable the DVB GUI
# bool, default: 1
#media.dvb.gui_enabled:1

# Last DVB channel viewed
# numeric, default: -1
#media.dvb.last_channel:-1

# default language for DVD playback
# string, default: en
#media.dvd.language:en

# region the DVD player claims to be in (1 to
# numeric, default: 1
#media.dvd.region:1

# device used for DVD playback
# string, default: /dev/dvd
#media.dvd.device:/dev/dvd

# read-ahead caching
# bool, default: 1
#media.dvd.readahead:1

# play mode when title/chapter is given
# { entire dvd one chapter }, default: 0
#media.dvd.play_single_chapter:entire dvd

# unit for seeking
# { seek in program chain seek in program }, default: 0
#media.dvd.seek_behaviour:seek in program chain

# unit for the skip action
# { skip program skip part skip title }, default: 0
#media.dvd.skip_behaviour:skip program

# file browsing start location
# string, default: /home/vdrbox
#media.files.origin_path:/home/vdrbox

# list hidden files
# bool, default: 0
#media.files.show_hidden_files:0

# network bandwidth
# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) }, default: 10

# Timeout for network stream reading (in seconds)
# numeric, default: 30
#media.network.timeout:30

# Domains for which to ignore the HTTP proxy
# string, default:
#media.network.http_no_proxy:

# HTTP proxy host
# string, default:
#media.network.http_proxy_host:

# HTTP proxy password
# string, default:
#media.network.http_proxy_password:

# HTTP proxy port
# numeric, default: 80
#media.network.http_proxy_port:80

# HTTP proxy username
# string, default:
#media.network.http_proxy_user:

# MMS protocol
# { auto TCP HTTP }, default: 0
#media.network.mms_protocol:auto

# automatically advance VCD track/entry
# bool, default: 1
#media.vcd.autoadvance:1

# VCD default type to use on autoplay
# { MPEG track entry segment playback-control item }, default: 3
#media.vcd.autoplay:playback-control item

# device used for VCD playback
# string, default: /dev/cdrom
#media.vcd.device:/dev/cdrom

# VCD position slider range
# { auto track entry }, default: 0
#media.vcd.length_reporting:auto

# show 'rejected' VCD LIDs
# bool, default: 0
#media.vcd.show_rejected:0

# VCD format string for stream comment field
# string, default: %P - Track %T
#media.vcd.comment_format:%P - Track %T

# VCD debug flag mask
# numeric, default: 0
#media.vcd.debug:0

# VCD format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A

# v4l ALSA audio input device
# string, default: plughw:0,0
#media.video4linux.audio_device:plughw:0,0

# v4l radio device
# string, default: /dev/radio0
#media.video4linux.radio_device:/dev/radio0

# v4l video device
# string, default: /dev/video0
#media.video4linux.video_device:/dev/video0

# v4l TV standard
# { AUTO PAL NTSC SECAM OLD }, default: 0
#media.video4linux.tv_standard:AUTO

# device used for WinTV-PVR 250/350 (pvr plugin)
# string, default: /dev/video0
#media.wintv_pvr.device:/dev/video0

# default VDR host
# string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
#media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block

# path to RealPlayer codecs
# string, default:
#decoder.external.real_codecs_path:

# path to Win32 codecs
# string, default: /usr/local/lib/win32
#decoder.external.win32_codecs_path:/usr/local/lib/win32

# opacity for the black parts of bitmapped subtitles
# [0..100], default: 67
#subtitles.bitmap.black_opacity:67

# opacity for the colour parts of bitmapped subtitles
# [0..100], default: 100
#subtitles.bitmap.colour_opacity:100

# subtitle size
# { tiny small normal large very large huge }, default: 1
#subtitles.separate.subtitle_size:small

# subtitle vertical offset
# numeric, default: 0
#subtitles.separate.vertical_offset:0

# font for subtitles
# string, default: sans
#subtitles.separate.font:sans

# encoding of the subtitles
# string, default: iso-8859-1
#subtitles.separate.src_encoding:iso-8859-1

# use unscaled OSD if possible
# bool, default: 1
#subtitles.separate.use_unscaled_osd:1

# frames per second to generate
# numeric, default: 14
#effects.goom.fps:14

# goom image height
# numeric, default: 240
#effects.goom.height:240

# goom image width
# numeric, default: 320
#effects.goom.width:320

# colour space conversion method
# { Fast but not photorealistic Slow but looks better }, default: 0
#effects.goom.csc_method:Fast but not photorealistic

# number of audio buffers
# numeric, default: 230
engine.buffers.audio_num_buffers:8

# number of video buffers
# numeric, default: 500
engine.buffers.video_num_buffers:500

# default number of video frames
# numeric, default: 15
engine.buffers.video_num_frames10

# priority for a/52 decoder
# numeric, default: 0
#engine.decoder_priorities.a/52:0

# priority for bitplane decoder
# numeric, default: 0
#engine.decoder_priorities.bitplane:0

# priority for dts decoder
# numeric, default: 0
#engine.decoder_priorities.dts:0

# priority for dvaudio decoder
# numeric, default: 0
#engine.decoder_priorities.dvaudio:0

# priority for faad decoder
# numeric, default: 0
#engine.decoder_priorities.faad:0

# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv8:0

# priority for ffmpeg-wmv9 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv9:0

# priority for ffmpegaudio decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegaudio:0

# priority for ffmpegvideo decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegvideo:0

# priority for gdkpixbuf decoder
# numeric, default: 0
#engine.decoder_priorities.gdkpixbuf:0

# priority for gsm610 decoder
# numeric, default: 0
#engine.decoder_priorities.gsm610:0

# priority for image decoder
# numeric, default: 0
#engine.decoder_priorities.image:0

# priority for mad decoder
# numeric, default: 0
#engine.decoder_priorities.mad:0

# priority for mpc decoder
# numeric, default: 0
#engine.decoder_priorities.mpc:0

# priority for mpeg2 decoder
# numeric, default: 0
engine.decoder_priorities.mpeg2:1

# priority for nsfdec decoder
# numeric, default: 0
#engine.decoder_priorities.nsfdec:0

# priority for pcm decoder
# numeric, default: 0
#engine.decoder_priorities.pcm:0

# priority for qta decoder
# numeric, default: 0
#engine.decoder_priorities.qta:0

# priority for qtv decoder
# numeric, default: 0
#engine.decoder_priorities.qtv:0

# priority for realadec decoder
# numeric, default: 0
#engine.decoder_priorities.realadec:0

# priority for realvdec decoder
# numeric, default: 0
#engine.decoder_priorities.realvdec:0

# priority for rgb decoder
# numeric, default: 0
#engine.decoder_priorities.rgb:0

# priority for spucc decoder
# numeric, default: 0
#engine.decoder_priorities.spucc:0

# priority for spucmml decoder
# numeric, default: 0
#engine.decoder_priorities.spucmml:0

# priority for spudec decoder
# numeric, default: 0
#engine.decoder_priorities.spudec:0

# priority for spudvb decoder
# numeric, default: 0
#engine.decoder_priorities.spudvb:0

# priority for sputext decoder
# numeric, default: 0
#engine.decoder_priorities.sputext:0

# priority for theora decoder
# numeric, default: 0
#engine.decoder_priorities.theora:0

# priority for vorbis decoder
# numeric, default: 0
#engine.decoder_priorities.vorbis:0

# priority for win32a decoder
# numeric, default: 0
#engine.decoder_priorities.win32a:0

# priority for win32v decoder
# numeric, default: 0
#engine.decoder_priorities.win32v:0

# priority for yuv decoder
# numeric, default: 0
#engine.decoder_priorities.yuv:0

# media format detection strategy
# { default reverse content extension }, default: 0
#engine.demux.strategy:default

# memcopy method used by xine
# { probe libc kernel mmx mmxext sse }, default: 0
engine.performance.memcpy_method:sse

# percentage of discarded frames to tolerate
# numeric, default: 10
#engine.performance.warn_discarded_threshold:10

# percentage of skipped frames to tolerate
# numeric, default: 10
#engine.performance.warn_skipped_threshold:10

# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0


Spero di aver fatto cosa gradita

I canali HD vanno un pò a scatti cosa posso fare??

Ho provato a cercare /home/nomeutente/.xine/ ( nel mio caso /home/vdrhd/.xine/)ma non c'è!!

Il mio sistema hardware 1 amd4850 2 gb ram scheda video geforce gt8500 scheda SkystarHD .

Grazie

[il_presid3]

/home/vdrhd/.xine/ è una directory
il file alla fine sarà /home/vdrhd/.xine/config_xineliboutput

da terminale gedit /home/vdrhd/.xine/config_xineliboutput

[francabis]

da terminale gedit /home/vdrhd/.xine/config_xineliboutput
si apre vuoto, lo riempio poi quando lo salvo mi da questo errore:

Impossibile trovare il file «/home/vdrhd/.xine/config_xineliboutput».

help

ciao

[francabis]

ho trovato in questa posizione /video/plugins/xineliboutput un file config

#
# xine config file
#
.version:2

# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.

# Use unscaled OSD
# bool, default: 0
#gui.osd_use_unscaled:0

# palette (primo piano-bordo-sfondo) da utilizzare per i sottotitoli e OSD
# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
#ui.osd.text_palette:white-black-transparent

# notifica modifiche al mixer hardware
# bool, default: 1
#audio.alsa_hw_mixer:1

# use A/52 dynamic range compression
# bool, default: 0
#audio.a52.dynamic_range:0

# downmix audio to 2 channel surround stereo
# bool, default: 0
audio.a52.surround_downmix:1

# A/52 volume
# [0..200], default: 100
#audio.a52.level:100

# dispositivo usato per output mono
# string, default: default
#audio.device.alsa_default_device:default

# dispositivo usato per output stereo
# string, default: plug:front:default
audio.device.alsa_front_device:default

# dispositivo mixer di alsa
# string, default: PCM
audio.device.alsa_mixer_name:Master

# la scheda audio può usare mmap
# bool, default: 0
#audio.device.alsa_mmap_enable:0

# dispositivo usato per output a canale 5.1
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
#audio.device.alsa_passthrough_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

# dispositivo usato per output a 4 canali
# string, default: plug:surround40:0
#audio.device.alsa_surround40_device:plug:surround40:0

# dispositivo usato per output a canale 5.1
# string, default: plug:surround51:0
audio.device.alsa_surround51_device:default

# disposizione degli speaker
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
audio.output.speaker_arrangement:Pass Through

# offset per il passaggio diretto digitale
# numeric, default: 0
#audio.synchronization.passthrough_offset:0

# riproduci audio anche a velocità basse/elevate
# bool, default: 0
#audio.synchronization.slow_fast_audio:0

# metodo di sincronia audio/video
# { metronom feedback resample }, default: 0
audio.synchronization.av_sync_method:resample

# ricampiona sempre a questa frequenza (0 per disabilitare)
# numeric, default: 0
#audio.synchronization.force_rate:0

# abilita ricampionamento
# { auto off on }, default: 0
#audio.synchronization.resample_mode:auto

# volume audio di partenza
# [0..100], default: 50
#audio.volume.mixer_volume:50

# ripristina il volume all'avvio
# bool, default: 0
#audio.volume.remember_volume:0

# pitch alignment workaround
# bool, default: 0
#video.device.xv_pitch_alignment:0

# video display method preference
# { Any Overlay Textured Video Blitter }, default: 0
#video.device.xv_preferred_method:Any

# Xv port number
# numeric, default: 0
#video.device.xv_port:0

# enable vblank sync
# bool, default: 1
#video.device.xv_sync_to_vblank:1

# disabilita la trasparenza esatta per gli overlay
# bool, default: 0
#video.output.disable_exact_alphablend:0

# disabilita il ridimensionamento video
# bool, default: 0
#video.output.disable_scaling:0

# posizione orizzontale dell'immagine nella finestra di visualizzazione
# [0..100], default: 50
#video.output.horizontal_position:50

# posizione vergicale dell'immagine nella finestra di visualizzazione
# [0..100], default: 50
#video.output.vertical_position:50

# Choose speed over specification compliance
# bool, default: 0
#video.processing.ffmpeg_choose_speed_over_accuracy:0

# MPEG-4 postprocessing quality
# [0..6], default: 3
#video.processing.ffmpeg_pp_quality:3

# Skip loop filter
# { default none nonref bidir nonkey all }, default: 0
#video.processing.ffmpeg_skip_loop_filter:default

# FFmpeg video decoding thread count
# numeric, default: 1
video.processing.ffmpeg_thread_count:2

# device used for CD audio
# string, default: /dev/cdrom
#media.audio_cd.device:/dev/cdrom

# slow down disc drive to this speed factor
# numeric, default: 4
#media.audio_cd.drive_slowdown:4

# query CDDB
# bool, default: 1
#media.audio_cd.use_cddb:1

# CDDB server port
# numeric, default: 8880
#media.audio_cd.cddb_port:8880

# CDDB server name
# string, default: freedb.freedb.org
#media.audio_cd.cddb_server:freedb.freedb.org

# Cartella di salvataggio degli stream
# string, default:
#media.capture.save_dir:

# Number of dvb card to use.
# numeric, default: 0
#media.dvb.adapter:0

# Remember last DVB channel watched
# bool, default: 1
#media.dvb.remember_channel:1

# Number of seconds until tuning times out.
# numeric, default: 0
#media.dvb.tuning_timeout:0

# Enable the DVB GUI
# bool, default: 1
#media.dvb.gui_enabled:1

# Last DVB channel viewed
# numeric, default: -1
#media.dvb.last_channel:-1

# default language for DVD playback
# string, default: en
#media.dvd.language:en

# region the DVD player claims to be in (1 to
# numeric, default: 1
#media.dvd.region:1

# device used for DVD playback
# string, default: /dev/dvd
#media.dvd.device:/dev/dvd

# read-ahead caching
# bool, default: 1
#media.dvd.readahead:1

# play mode when title/chapter is given
# { entire dvd one chapter }, default: 0
#media.dvd.play_single_chapter:entire dvd

# unit for seeking
# { seek in program chain seek in program }, default: 0
#media.dvd.seek_behaviour:seek in program chain

# unit for the skip action
# { skip program skip part skip title }, default: 0
#media.dvd.skip_behaviour:skip program

# file browsing start location
# string, default: /usr/local/src/vdr-1.7.0
#media.files.origin_path:/usr/local/src/vdr-1.7.0

# list hidden files
# bool, default: 0
#media.files.show_hidden_files:0

# network bandwidth
# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) }, default: 10

# Timeout per la lettura dei flussi via rete (in secondi)
# numeric, default: 30
#media.network.timeout:30

# Domains for which to ignore the HTTP proxy
# string, default:
#media.network.http_no_proxy:

# HTTP proxy host
# string, default:
#media.network.http_proxy_host:

# HTTP proxy password
# string, default:
#media.network.http_proxy_password:

# HTTP proxy port
# numeric, default: 80
#media.network.http_proxy_port:80

# HTTP proxy username
# string, default:
#media.network.http_proxy_user:

# MMS protocol
# { auto TCP HTTP }, default: 0
#media.network.mms_protocol:auto

# automatically advance VCD track/entry
# bool, default: 1
#media.vcd.autoadvance:1

# VCD default type to use on autoplay
# { MPEG track entry segment playback-control item }, default: 3
#media.vcd.autoplay:playback-control item

# CD-ROM drive used for VCD when none given
# string, default:
#media.vcd.device:

# VCD position slider range
# { auto track entry }, default: 0
#media.vcd.length_reporting:auto

# show 'rejected' VCD LIDs
# bool, default: 0
#media.vcd.show_rejected:0

# VCD format string for stream comment field
# string, default: %P - Track %T
#media.vcd.comment_format:%P - Track %T

# VCD debug flag mask
# numeric, default: 0
#media.vcd.debug:0

# VCD format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A

# v4l ALSA audio input device
# string, default: plughw:0,0
#media.video4linux.audio_device:plughw:0,0

# v4l radio device
# string, default: /dev/radio0
#media.video4linux.radio_device:/dev/radio0

# v4l video device
# string, default: /dev/video0
#media.video4linux.video_device:/dev/video0

# v4l TV standard
# { AUTO PAL NTSC SECAM OLD }, default: 0
#media.video4linux.tv_standard:AUTO

# device used for WinTV-PVR 250/350 (pvr plugin)
# string, default: /dev/video0
#media.wintv_pvr.device:/dev/video0

# default VDR host
# string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
#media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block

# Fast (low-quality) OSD scaling
# bool, default: 0
#media.xvdr.fast_osd_scaling:0

# SRC tuning step
# numeric, default: 5000
#media.xvdr.scr_tuning_step:5000

# path to RealPlayer codecs
# string, default:
#decoder.external.real_codecs_path:

# path to Win32 codecs
# string, default: /usr/local/lib/win32
#decoder.external.win32_codecs_path:/usr/local/lib/win32

# opacity for the black parts of bitmapped subtitles
# [0..100], default: 67
#subtitles.bitmap.black_opacity:67

# opacity for the colour parts of bitmapped subtitles
# [0..100], default: 100
#subtitles.bitmap.colour_opacity:100

# subtitle size
# { tiny small normal large very large huge }, default: 1
#subtitles.separate.subtitle_size:small

# subtitle vertical offset
# numeric, default: 0
#subtitles.separate.vertical_offset:0

# font for subtitles
# string, default: sans
#subtitles.separate.font:sans

# encoding of the subtitles
# string, default: iso-8859-1
#subtitles.separate.src_encoding:iso-8859-1

# use unscaled OSD if possible
# bool, default: 1
#subtitles.separate.use_unscaled_osd:1

# frames per second to generate
# numeric, default: 14
#effects.goom.fps:14

# goom image height
# numeric, default: 240
#effects.goom.height:240

# goom image width
# numeric, default: 320
#effects.goom.width:320

# colour space conversion method
# { Fast but not photorealistic Slow but looks better }, default: 0
#effects.goom.csc_method:Fast but not photorealistic

# numero di buffer audio
# numeric, default: 230
#engine.buffers.audio_num_buffers:230

# number of video buffers
# numeric, default: 500
engine.buffers.video_num_buffers:250

# numero predefinito di frame video
# numeric, default: 15
#engine.buffers.video_num_frames:15

# priorità per il decoder a/52
# numeric, default: 0
#engine.decoder_priorities.a/52:0

# priorità per il decoder bitplane
# numeric, default: 0
#engine.decoder_priorities.bitplane:0

# priorità per il decoder dts
# numeric, default: 0
#engine.decoder_priorities.dts:0

# priorità per il decoder dvaudio
# numeric, default: 0
#engine.decoder_priorities.dvaudio:0

# priorità per il decoder faad
# numeric, default: 0
#engine.decoder_priorities.faad:0

# priorità per il decoder ffmpeg-wmv8
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv8:0

# priorità per il decoder ffmpeg-wmv9
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv9:0

# priorità per il decoder ffmpegaudio
# numeric, default: 0
#engine.decoder_priorities.ffmpegaudio:0

# priorità per il decoder ffmpegvideo
# numeric, default: 0
#engine.decoder_priorities.ffmpegvideo:0

# priorità per il decoder gdkpixbuf
# numeric, default: 0
#engine.decoder_priorities.gdkpixbuf:0

# priorità per il decoder gsm610
# numeric, default: 0
#engine.decoder_priorities.gsm610:0

# priorità per il decoder image
# numeric, default: 0
#engine.decoder_priorities.image:0

# priorità per il decoder mad
# numeric, default: 0
#engine.decoder_priorities.mad:0

# priorità per il decoder mpc
# numeric, default: 0
#engine.decoder_priorities.mpc:0

# priorità per il decoder mpeg2
# numeric, default: 0
#engine.decoder_priorities.mpeg2:0

# priorità per il decoder nsfdec
# numeric, default: 0
#engine.decoder_priorities.nsfdec:0

# priorità per il decoder pcm
# numeric, default: 0
#engine.decoder_priorities.pcm:0

# priorità per il decoder qta
# numeric, default: 0
#engine.decoder_priorities.qta:0

# priorità per il decoder qtv
# numeric, default: 0
#engine.decoder_priorities.qtv:0

# priorità per il decoder realadec
# numeric, default: 0
#engine.decoder_priorities.realadec:0

# priorità per il decoder realvdec
# numeric, default: 0
#engine.decoder_priorities.realvdec:0

# priorità per il decoder rgb
# numeric, default: 0
#engine.decoder_priorities.rgb:0

# priorità per il decoder spucc
# numeric, default: 0
#engine.decoder_priorities.spucc:0

# priorità per il decoder spucmml
# numeric, default: 0
#engine.decoder_priorities.spucmml:0

# priorità per il decoder spudec
# numeric, default: 0
#engine.decoder_priorities.spudec:0

# priorità per il decoder spudvb
# numeric, default: 0
#engine.decoder_priorities.spudvb:0

# priorità per il decoder sputext
# numeric, default: 0
#engine.decoder_priorities.sputext:0

# priorità per il decoder theora
# numeric, default: 0
#engine.decoder_priorities.theora:0

# priorità per il decoder vorbis
# numeric, default: 0
#engine.decoder_priorities.vorbis:0

# priorità per il decoder win32a
# numeric, default: 0
#engine.decoder_priorities.win32a:0

# priorità per il decoder win32v
# numeric, default: 0
#engine.decoder_priorities.win32v:0

# priorità per il decoder yuv
# numeric, default: 0
#engine.decoder_priorities.yuv:0

# Strategia di riconoscimento del formato di contenuto
# { default reverse content extension }, default: 0
#engine.demux.strategy:default

# metodo di copia di memoria usato da xine
# { probe libc kernel mmx mmxext sse }, default: 0
engine.performance.memcpy_method:mmxext

# percentuale di frame scartati da tollerare.
# numeric, default: 10
#engine.performance.warn_discarded_threshold:10

# percentuale di frame saltati da tollerare.
# numeric, default: 10
#engine.performance.warn_skipped_threshold:10

# permetti modifiche implicite alla configurazione (per esmepio tramite MRL)
# bool, default: 0
#misc.implicit_config:0

è questo?

io ho provato a mettere il config di theguru ma sui ch HD l'immagine ogni 2 secondi accelera per poi tornare fluida poi accelera e ecc. mentre i ch normali vanno benissimo.

Altra cosina da quando sono andato sui ch HD si è attivata la traccia audio ac3 e ho l'audio dolby digital 5.1 ma quando sono tornato sui ch che trasmetto in stereo non si sentono più niente

Volevo provare xine-lib di vdpau ma non vorrei incasinare tutto.

Ciao

[francabis]

X vedere dove è config_xineliboutput come posso fare?
Dai suuu
Ciao