vorrei configurare il telecomando TTS35AI della mia scheda. E' del tipo con attacco mini jack direttamente collegato sulla scheda.
Ho fatto l'autoapprendimento , ma quando arrivo al tasto 0 , volume + e volume - non reagisce.
il remote.conf generato è questo
Codice: Seleziona tutto
remote-event6.Up 00000001000100C9
remote-event6.Down 0000000100010066
remote-event6.Menu 0000000100010160
remote-event6.Ok 000000010001018E
remote-event6.Back 0000000100010044
remote-event6.Left 0000000100010069
remote-event6.Right 0000000100010067
remote-event6.Red 0000000100010043
remote-event6.Green 00000001000100C8
remote-event6.Yellow 000000010001009E
remote-event6.Blue 00000001000100A8
remote-event6.1 0000000100010074
remote-event6.2 0000000100010002
remote-event6.3 0000000100010003
remote-event6.4 0000000100010004
remote-event6.5 0000000100010005
remote-event6.6 0000000100010006
remote-event6.7 0000000100010007
remote-event6.8 0000000100010008
remote-event6.9 0000000100010009
remote-event6.Info 0000000100010193
remote-event6.Power 000000010001000B
remote-event6.Mute 000000010001003F
remote-event6.Schedule 000000010001016D
remote-event6.Channels 0000000100010197
remote-event6.Setup 0000000100010189
remote-event6.Commands 00000001000100A7
da http://lirc.sourceforge.net/remotes/technisat/TTS35AI ho copiato il lircd e incollato nel lircd.conf ma nessuna novità.
Codice: Seleziona tutto
#
# this config file was automatically generated
# using lirc-0.7.1pre2(any) on Mon Jul 4 22:11:52 2005
#
# contributed by
#
# brand: Technisat
# model no. of remote control: TTS35AI
# devices being controlled by this remote: Skystar 2.6D
#
begin remote
name Technisat_TTS35AI.conf
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 882 803
zero 882 803
plead 905
gap 112766
toggle_bit 2
begin codes
Power 0x1A8C
Mute 0x1A8D
1 0x1281
2 0x1A82
3 0x1283
4 0x1A84
5 0x1285
6 0x1A86
7 0x1287
8 0x1A88
9 0x1289
0 0x1A80
-/-- 0x128A
A/B 0x1AA3
Red 0x0AAB
Green 0x02AC
Yellow 0x0AAD
Blue 0x02AE
Ok 0x0A97
Up 0x12A0
Down 0x1AA1
Left 0x1291
Right 0x1A90
SFI 0x12AF
Back 0x1AA2
Info 0x028F
# Prog+ 0x1AA0
# Prog- 0x12A1
TV/Radio 0x0293
# Volume+ 0x1A90
# Volume- 0x1291
Menu 0x0A92
Hilfe 0x1A8F
TXT 0x12BC
STOP 0x1AA9
EXT 0x12B8
HILFE2 0x0AB6
end codes
end remote
C'è qualcosa che mi sfugge?