VDR-HD con SkystarHD con decodifica via software
Moderatori: ragno, tapino, alez, zulu, davidea
Re: VDR-HD con SkystarHD con decodifica via software
No, sono valide solo per la 8.04 LTS.
Forse più avanti quando avrò del tempo farò dei test per vedere se funzionano con la 8.10 e caso mai le aggiornerò.
Per il momento potete provare e caso mai riportate gli errori così li tengo in mente per il momento in cui aggiornerò.
Forse più avanti quando avrò del tempo farò dei test per vedere se funzionano con la 8.10 e caso mai le aggiornerò.
Per il momento potete provare e caso mai riportate gli errori così li tengo in mente per il momento in cui aggiornerò.
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Re: VDR-HD con SkystarHD con decodifica via software
Ciao, inizio io.Gringo ha scritto:No, sono valide solo per la 8.04 LTS.
Forse più avanti quando avrò del tempo farò dei test per vedere se funzionano con la 8.10 e caso mai le aggiornerò.
Per il momento potete provare e caso mai riportate gli errori così li tengo in mente per il momento in cui aggiornerò.
Guida eseguita passo passo. Nessun errore durante il processo.
Tuttavia, quando lancio
ottengo il seguente risultato:vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd --post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
Uso ubuntu 8.10, aggiornata a oggi, con la skystarHD, athlon 2500@3200 ed 1 gb di ram in dualchannel.vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1280
Height: 720
Keyboard input disabled
Post plugins: tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
VDR server not given, searching ...
---------------------------------------------------------------
WARNING: MRL not given and server not found from local network.
Trying to connect to default port on local host.
---------------------------------------------------------------
[20297] [input_vdr] Using decoder "libmpeg2" for mpeg2 video
[20297] [input_vdr] Using decoder "FFmpeg" for H.264 video
[20297] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
[20297] [input_vdr] Can't connect to tcp://127.0.0.1:37890
[20297] [input_vdr] (ERROR (xine_input_vdr.c,6057): Operation now in progress)
[20297] [input_vdr] Can't connect to tcp://127.0.0.1:37890
[20297] [input_vdr] (ERROR (xine_input_vdr.c,6481): Operation now in progress)
[20297] [input_vdr] Connections closed.
[20297] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1#nocache;demux:mpeg_block") failed
Error opening xvdr://127.0.0.1
P.s., installando a mano i drivers multiproto ed installando kaffeine, vdr ed un pò di plugins da synaptic, riesco a vedere. Peccato che non sappia come convertire il file channels.conf in un formato compatibile per kaffeine.
Re: VDR-HD con SkystarHD con decodifica via software
Direi veramente ottimo Gringo se ci sono sviluppi ti tengo aggiornato.Gringo ha scritto:Ecco qua la guida:theguru ha scritto:Ciao! Certo che puoiGringo ha scritto:@ Theguru: volevo chiedere il tuo permesso per mettere questa guida nel mio wiki citando ovviamente la fonte. Posso?
http://gringo.netsons.org/wiki/doku.php ... _skystarhd
Ciauz!
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDR-HD con SkystarHD con decodifica via software
Stasera do un'occhiata e ti dicoSav ha scritto:Ciao, inizio io.Gringo ha scritto:No, sono valide solo per la 8.04 LTS.
Forse più avanti quando avrò del tempo farò dei test per vedere se funzionano con la 8.10 e caso mai le aggiornerò.
Per il momento potete provare e caso mai riportate gli errori così li tengo in mente per il momento in cui aggiornerò.
Guida eseguita passo passo. Nessun errore durante il processo.
Tuttavia, quando lancioottengo il seguente risultato:vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd --post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1Uso ubuntu 8.10, aggiornata a oggi, con la skystarHD, athlon 2500@3200 ed 1 gb di ram in dualchannel.vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1280
Height: 720
Keyboard input disabled
Post plugins: tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
VDR server not given, searching ...
---------------------------------------------------------------
WARNING: MRL not given and server not found from local network.
Trying to connect to default port on local host.
---------------------------------------------------------------
[20297] [input_vdr] Using decoder "libmpeg2" for mpeg2 video
[20297] [input_vdr] Using decoder "FFmpeg" for H.264 video
[20297] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
[20297] [input_vdr] Can't connect to tcp://127.0.0.1:37890
[20297] [input_vdr] (ERROR (xine_input_vdr.c,6057): Operation now in progress)
[20297] [input_vdr] Can't connect to tcp://127.0.0.1:37890
[20297] [input_vdr] (ERROR (xine_input_vdr.c,6481): Operation now in progress)
[20297] [input_vdr] Connections closed.
[20297] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1#nocache;demux:mpeg_block") failed
Error opening xvdr://127.0.0.1
P.s., installando a mano i drivers multiproto ed installando kaffeine, vdr ed un pò di plugins da synaptic, riesco a vedere. Peccato che non sappia come convertire il file channels.conf in un formato compatibile per kaffeine.
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDR-HD con SkystarHD con decodifica via software
Bene, posta qui le modifiche che poi aggiorno.
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Re: VDR-HD con SkystarHD con decodifica via software
accidenti non cé verso di installare ubunto 8.04 nella mia macchina
provato anche a lasciarci solo 1 hd ide parte ma poi fa il botto al partizionamento in tutti casi sia da wubi che da live che direttamente.
l hardware é il seguente.
MB abit IP35 Pro
intel core duo E6850 3G
2 giga ram
2 hd sata 400 G
1 ata 250G
video ati hd 3870
holo3d capture card
tt3200
ss2
imon MM
provato anche a lasciarci solo 1 hd ide parte ma poi fa il botto al partizionamento in tutti casi sia da wubi che da live che direttamente.
l hardware é il seguente.
MB abit IP35 Pro
intel core duo E6850 3G
2 giga ram
2 hd sata 400 G
1 ata 250G
video ati hd 3870
holo3d capture card
tt3200
ss2
imon MM
Re: VDR-HD con SkystarHD con decodifica via software
Il controller sata com'è configurato? Sata o Ahci?peo ha scritto:accidenti non cé verso di installare ubunto 8.04 nella mia macchina
provato anche a lasciarci solo 1 hd ide parte ma poi fa il botto al partizionamento in tutti casi sia da wubi che da live che direttamente.
l hardware é il seguente.
MB abit IP35 Pro
intel core duo E6850 3G
2 giga ram
2 hd sata 400 G
1 ata 250G
video ati hd 3870
holo3d capture card
tt3200
ss2
imon MM
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDR-HD con SkystarHD con decodifica via software
ci sono 3 possibilitá
Ahci - ide - raid
ora é in ide
comunque non si installa comunque anche togliendo fisicamente l alimentazione ai 2 hd sata e lasciando l ata.( che x altro é l hd che ho dedocato a linux )
mentre la 8.10 entra perfettamente
Ahci - ide - raid
ora é in ide
comunque non si installa comunque anche togliendo fisicamente l alimentazione ai 2 hd sata e lasciando l ata.( che x altro é l hd che ho dedocato a linux )
mentre la 8.10 entra perfettamente
Re: VDR-HD con SkystarHD con decodifica via software
Imposta ahci.
Alla peggio prova a inserire al boot i seguenti parametri (mi pare premendo F4 o F6 prima di selezionare la modalità di boot)
noapic nolapic
oppure, nel caso rimanesse il problema,
acpi=off
Ci potrebbe essere un problema nella gestione del risparmio energetico a causa della combinazione bios+chipset.
Io ho una asus p5wdh deluxe e riesco ad avere un linux stabile solo con acpi=off.
P.s. @moderatori: non funziona la notifica delle risposte al topic, è normale? [moderatori: risolto ]
Alla peggio prova a inserire al boot i seguenti parametri (mi pare premendo F4 o F6 prima di selezionare la modalità di boot)
noapic nolapic
oppure, nel caso rimanesse il problema,
acpi=off
Ci potrebbe essere un problema nella gestione del risparmio energetico a causa della combinazione bios+chipset.
Io ho una asus p5wdh deluxe e riesco ad avere un linux stabile solo con acpi=off.
P.s. @moderatori: non funziona la notifica delle risposte al topic, è normale? [moderatori: risolto ]
Re: VDR-HD con SkystarHD con decodifica via software
Togli tutte le schede e prova con solo il disco.
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Re: VDR-HD con SkystarHD con decodifica via software
niente da fare
non ne vuole sapere di installarsi
aspettero il vdr x 8.10
ciao
non ne vuole sapere di installarsi
aspettero il vdr x 8.10
ciao
Re: VDR-HD con SkystarHD con decodifica via software
errore ci fu!!!
a questo punto della procedura:
cd xine-lib-1.2
./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32
fin qui tutto okey appena do il make esce fuori questo errore:
-DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c -o configfile.lo configfile.c
gcc -DHAVE_CONFIG_H -I. -I../../include -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -I../../lib -I../../contrib/libxdg-basedir -DXINE_LIBRARY_COMPILE -D_FILE_OFFSET_BITS=64 -DNDEBUG -D_REENTRANT -DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c configfile.c -fPIC -DPIC -o .libs/configfile.o
configfile.c:37:22: error: base64.h: Nessun file o directory
configfile.c: In function ‘config_xlate_internal’:
configfile.c:359: warning: return discards qualifiers from pointer target type
configfile.c: In function ‘config_register_enum’:
configfile.c:764: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c:772: warning: assignment from incompatible pointer type
configfile.c:779: warning: assignment from incompatible pointer type
configfile.c: In function ‘config_update_string’:
configfile.c:878: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c: In function ‘config_get_serialized_entry’:
configfile.c:1353: error: implicit declaration of function ‘av_base64_encode’
configfile.c:1270: warning: unused variable ‘output_len’
configfile.c: In function ‘config_register_serialized_entry’:
configfile.c:1427: error: implicit declaration of function ‘av_base64_decode’
make[2]: *** [configfile.lo] Error 1
make[2]: Leaving directory `/usr/local/src/xine-lib-1.2/src/xine-engine'
make[1]: *** [../src/xine-engine/libxine.la] Error 2
make[1]: Leaving directory `/usr/local/src/xine-lib-1.2/misc'
make: *** [all-recursive] Error 1
root@vdr-desktop:/usr/local/src/xine-lib-1.2#
a questo punto della procedura:
cd xine-lib-1.2
./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32
fin qui tutto okey appena do il make esce fuori questo errore:
-DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c -o configfile.lo configfile.c
gcc -DHAVE_CONFIG_H -I. -I../../include -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -I../../lib -I../../contrib/libxdg-basedir -DXINE_LIBRARY_COMPILE -D_FILE_OFFSET_BITS=64 -DNDEBUG -D_REENTRANT -DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c configfile.c -fPIC -DPIC -o .libs/configfile.o
configfile.c:37:22: error: base64.h: Nessun file o directory
configfile.c: In function ‘config_xlate_internal’:
configfile.c:359: warning: return discards qualifiers from pointer target type
configfile.c: In function ‘config_register_enum’:
configfile.c:764: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c:772: warning: assignment from incompatible pointer type
configfile.c:779: warning: assignment from incompatible pointer type
configfile.c: In function ‘config_update_string’:
configfile.c:878: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c: In function ‘config_get_serialized_entry’:
configfile.c:1353: error: implicit declaration of function ‘av_base64_encode’
configfile.c:1270: warning: unused variable ‘output_len’
configfile.c: In function ‘config_register_serialized_entry’:
configfile.c:1427: error: implicit declaration of function ‘av_base64_decode’
make[2]: *** [configfile.lo] Error 1
make[2]: Leaving directory `/usr/local/src/xine-lib-1.2/src/xine-engine'
make[1]: *** [../src/xine-engine/libxine.la] Error 2
make[1]: Leaving directory `/usr/local/src/xine-lib-1.2/misc'
make: *** [all-recursive] Error 1
root@vdr-desktop:/usr/local/src/xine-lib-1.2#
Re: VDR-HD con SkystarHD con decodifica via software
configura il controller come IDE e vedra che va ... se non va prova ad installare l'8.10 non penso che sia molto differente la procedurapeo ha scritto:niente da fare
non ne vuole sapere di installarsi
aspettero il vdr x 8.10
ciao
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDR-HD con SkystarHD con decodifica via software
Questo lo da quando c'era già qualche altra versione di xinelib prima ... fallo su un sistema operativo pulito e vedrai che va al primo colpoSoGo ha scritto:errore ci fu!!!
a questo punto della procedura:
cd xine-lib-1.2
./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32
fin qui tutto okey appena do il make esce fuori questo errore:
-DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c -o configfile.lo configfile.c
gcc -DHAVE_CONFIG_H -I. -I../../include -I../.. -I../../include -I../../include -I../../src -I../../src/xine-engine -I../../src/xine-engine -I../../src/xine-utils -I../../src/input -I../../src/input -I../../lib -I../../lib -I../../contrib/libxdg-basedir -DXINE_LIBRARY_COMPILE -D_FILE_OFFSET_BITS=64 -DNDEBUG -D_REENTRANT -DXINE_COMPILE -O3 -ffast-math -fexpensive-optimizations -mtune=athlon -fvisibility=hidden -pipe -Wall -Wformat=2 -Wno-format-zero-length -Wmissing-format-attribute -Werror-implicit-function-declaration -Wstrict-aliasing=2 -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wpointer-arith -g -MT configfile.lo -MD -MP -MF .deps/configfile.Tpo -c configfile.c -fPIC -DPIC -o .libs/configfile.o
configfile.c:37:22: error: base64.h: Nessun file o directory
configfile.c: In function ‘config_xlate_internal’:
configfile.c:359: warning: return discards qualifiers from pointer target type
configfile.c: In function ‘config_register_enum’:
configfile.c:764: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c:772: warning: assignment from incompatible pointer type
configfile.c:779: warning: assignment from incompatible pointer type
configfile.c: In function ‘config_update_string’:
configfile.c:878: warning: passing argument 2 of ‘config_parse_enum’ from incompatible pointer type
configfile.c: In function ‘config_get_serialized_entry’:
configfile.c:1353: error: implicit declaration of function ‘av_base64_encode’
configfile.c:1270: warning: unused variable ‘output_len’
configfile.c: In function ‘config_register_serialized_entry’:
configfile.c:1427: error: implicit declaration of function ‘av_base64_decode’
make[2]: *** [configfile.lo] Error 1
make[2]: Leaving directory `/usr/local/src/xine-lib-1.2/src/xine-engine'
make[1]: *** [../src/xine-engine/libxine.la] Error 2
make[1]: Leaving directory `/usr/local/src/xine-lib-1.2/misc'
make: *** [all-recursive] Error 1
root@vdr-desktop:/usr/local/src/xine-lib-1.2#
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDR-HD con SkystarHD con decodifica via software
Oppure rimuovi ogni voce con ”libxine1” e ”xine-ui” nel sistema (a tuo rischio e pericolo!)
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF