VDPAU+XINELIBOUTPUT E HDTV!!!
Moderatori: ragno, tapino, alez, zulu, davidea
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
ottimo lavoro ragazzi ora va ancora meglio
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Per eliminare il tearing si deve impostare la frequenza di aggiornamento del monitor a 50hz...maidiremaik ha scritto:PERFETTO HAI CENTRATO E COLPITO!!!MAV ha scritto:@maidiremaik: siccome la mia installazione non era andata a buon fine, prima di riprovarci ho fatto un veloce test con XBMC, per cui non ho ancora impressioni a proposito.
Il difetto che lamenti è il tearing? Cioè capita che l'immagine sia spezzettata da una linea orizzontale per cui i due schermi parziali sono sfasati orizzontalmente?
mi fa proprio una cosa del genere come se l'immagine andasse su due schermi a scalette due schermi orizzontali quando si cambia campo orizzontalmente si divide proprio lo schermo in almeno 2-3 rettangoloni sfalsati e a scaletta!!!!
Se non ricordo male c'e' una discussione in merito anche sulla ML di vdr...
saluti
ragno
vdr: 1.4.7+extpatch54 (pensionata), 1.7.27 (yavdr 0.4)
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.
E quando penso che sia finita,
è proprio allora che comincia la salita.
Percorri la via che porta al sole,
e non camminare sui sentieri oscuri.
E quando penso che sia finita,
è proprio allora che comincia la salita.
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
@maidiremaik: mi fa piacere che tu abbia risolto . Almeno una volta che posso essere d'aiuto nel mio piccolo anch'io .
Il tearing è un "difetto" già conosciuto da tempo sui media center basati su winzozz: capitava quando si abilitava l'uscita video in contemporanea con l'uscita VGA nella maggior parte di schede video, quando gli HTPC erano collegati tramite S-Video o Composito a TV CRT ...per cui per risolvere si doveva evitare il funzionamento a doppia uscita video.
Oppure è un difetto che aveva Vista Media Center se non siabilitava l'Aero...beh, cosa centra direte voi, eppure era proprio così, per esempio un media center basato su Vista con Aero non abilitato si era soggetti al tearing....maremma quante prove che ho fatto in quei tempi ...
Ciao, MAV
Il tearing è un "difetto" già conosciuto da tempo sui media center basati su winzozz: capitava quando si abilitava l'uscita video in contemporanea con l'uscita VGA nella maggior parte di schede video, quando gli HTPC erano collegati tramite S-Video o Composito a TV CRT ...per cui per risolvere si doveva evitare il funzionamento a doppia uscita video.
Oppure è un difetto che aveva Vista Media Center se non siabilitava l'Aero...beh, cosa centra direte voi, eppure era proprio così, per esempio un media center basato su Vista con Aero non abilitato si era soggetti al tearing....maremma quante prove che ho fatto in quei tempi ...
Ciao, MAV
-
- Messaggi: 381
- Iscritto il: 28 mag 2007, 13:21
- Località: 192.168.0.2
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
si ma in pratica non ci sono mai riuscito ad abilitarlo da pannello di controllo nvidia sai dirmi come fare visto che mi va inesorabilmente sui 60 Hz ?ragno ha scritto:
Per eliminare il tearing si deve impostare la frequenza di aggiornamento del monitor a 50hz...
Se non ricordo male c'e' una discussione in merito anche sulla ML di vdr...
saluti
ragno
grazie
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Non vorrei essere stufoso (dato che in passato avevo già sponsorizzato), però qui propone soluzioni per il tearing (come hai detto tu maidiremaik) e per settare a 60Hz:
http://blog.mymediasystem.net/avchd/vdp ... t-tearing/
http://blog.mymediasystem.net/avchd/vdp ... t-tearing/
-
- Messaggi: 381
- Iscritto il: 28 mag 2007, 13:21
- Località: 192.168.0.2
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
CIAO MAMO GRAZIE AVEVO GIà LETTO DEVO SETTARE A 50 NON A 60!
-
- Messaggi: 381
- Iscritto il: 28 mag 2007, 13:21
- Località: 192.168.0.2
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
per completezza di informazioni aggiungo che ora la situazione è perfetta su tutti i fronti , niente piu' tearing , fenomeno scomparso del tutto
allego lo script di avvio se dovesse servire a qualcuno , sperando di fare cosa gradita
vdr-sxfe --video=vdpau --audio=alsa --aspect=16:9 --fullscreen --daemon --reconnect --width=1280 --height=720 --nokbd --post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
ciao
allego lo script di avvio se dovesse servire a qualcuno , sperando di fare cosa gradita
vdr-sxfe --video=vdpau --audio=alsa --aspect=16:9 --fullscreen --daemon --reconnect --width=1280 --height=720 --nokbd --post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
ciao
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
io lo uso così come consigliato anche su vdrportal:
vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_driver
ciau
vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_driver
ciau
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Pensavo di aver risolto i problemi con xineliboutput, ma al comando per compilare i plugin di VDR ottengo questo errore:
Allora provo a verificare:
Si riesce a capire dove sbaglio?
Codice: Seleziona tutto
root@HTPC:/usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput# cp *.mpg /video/plugins/xineliboutput/
root@HTPC:/usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput# cd /usr/local/src/vdr-1.7.0
root@HTPC:/usr/local/src/vdr-1.7.0# make plugins
Plugin hello:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/hello'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/hello'
Plugin osddemo:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/osddemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/osddemo'
Plugin pictures:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/pictures'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/pictures'
Plugin servicedemo:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/servicedemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/servicedemo'
Plugin skincurses:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/skincurses'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/skincurses'
Plugin sky:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/sky'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/sky'
Plugin status:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/status'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/status'
Plugin svdrpdemo:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/svdrpdemo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/svdrpdemo'
Plugin xineliboutput:
make[1]: Entering directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput'
Makefile:462: *********************** xineliboutput ***************************
Makefile:462: Xine plugins and frontends will not be installed automatically.
Makefile:462: To install files execute "make install" in
Makefile:462: /usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput
Makefile:462: *****************************************************************
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput'
root@HTPC:/usr/local/src/vdr-1.7.0# cd /usr/local/src/vdr-1.7.0/PLUGINS/xineliboutput
bash: cd: /usr/local/src/vdr-1.7.0/PLUGINS/xineliboutput: Nessun file o directory
Codice: Seleziona tutto
root@HTPC:/usr/local/src/vdr-1.7.0# dir
audio.c dvbspu.h lirc.o receiver.h spu.h
audio.h dvbspu.o locale receiver.o spu.o
audio.o dvbsubtitle.c Make.config recorder.c status.c
channels.c dvbsubtitle.h Make.config~ recorder.h status.h
channels.conf dvbsubtitle.o Make.config.template recorder.o status.o
channels.conf.cable eit.c Makefile recording.c summary2info.pl
channels.conf.terr eit.h MANUAL recording.h svdrp.c
channels.h eit.o menu.c recording.o svdrp.h
channels.o eitscan.c menu.h remote.c svdrphosts.conf
ci.c eitscan.h menuitems.c remote.h svdrp.o
ci.h eitscan.o menuitems.h remote.o svdrpsend.pl
ci.o epg2html.pl menuitems.o remux.c symbols
config.c epg.c menu.o remux.h themes.c
config.h epg.h newplugin remux.o themes.h
config.o epg.o nit.c ringbuffer.c themes.o
CONTRIBUTORS filter.c nit.h ringbuffer.h thread.c
COPYING filter.h nit.o ringbuffer.o thread.h
cutter.c filter.o osdbase.c runvdr thread.o
cutter.h font.c osdbase.h sdt.c timers.c
cutter.o font.h osdbase.o sdt.h timers.h
device.c font.o osd.c sdt.o timers.o
device.h h264parser.c osd.h sections.c tools.c
device.o h264parser.h osd.o sections.h tools.h
diseqc.c h264parser.o pat.c sections.o tools.o
diseqc.conf HISTORY pat.h shutdown.c transfer.c
diseqc.h i18n.c pat.o shutdown.h transfer.h
diseqc.o i18n.h player.c shutdown.o transfer.o
Doxyfile i18n.o player.h skinclassic.c UPDATE-1.2.0
dvbci.c i18n-to-gettext.pl player.o skinclassic.h UPDATE-1.4.0
dvbci.h include plugin.c skinclassic.o UPDATE-1.6.0
dvbci.o INSTALL plugin.h skins.c vdr
dvbdevice.c interface.c plugin.o skins.h vdr.1
dvbdevice.h interface.h PLUGINS skins.o vdr.5
dvbdevice.o interface.o PLUGINS.html skinsttng.c vdr.c
dvbosd.c keymacros.conf po skinsttng.h vdr.o
dvbosd.h keys.c rcu.c skinsttng.o videodir.c
dvbosd.o keys.h rcu.h sources.c videodir.h
dvbplayer.c keys.o rcu.o sources.conf videodir.o
dvbplayer.h libsi README sources.h
dvbplayer.o lirc.c README.i18n sources.o
dvbspu.c lirc.h receiver.c spu.c
root@HTPC:/usr/local/src/vdr-1.7.0# cd PLUGINS
root@HTPC:/usr/local/src/vdr-1.7.0/PLUGINS# dir
lib src
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Carissimo, non c'è nessun errore è solo una svista
cd /usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput
e poi un bell
make install
ed è tutto fatto non è un errore anzi
Ciao
cd /usr/local/src/vdr-1.7.0/PLUGINS/src/xineliboutput
e poi un bell
make install
ed è tutto fatto non è un errore anzi
Ciao
VDRBOXHD1:
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Intel Core2duo 8400 - 2GB DDR2-800 - Nvidia 9300 - SSD 60GB - Tevii 464 - Mint 15 x64 MCE Remote
VDRBOXHD2:
Intel Athom 1.6Ghz 330 ION - 1Gb ram DDR2-800 - 80GB Sata - DVD-Rw Slim - SkyStarHD2 - Linux Mint Maya MCE Remote
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Ottimo, grazie theguru, in effetti mi ero perso un src per strada ...
Ora viene il bello , ultimi due comandi:
Alcuni secondi di schermo nero, e poi torna utomaticamente al terminale, provo con:
stessa cosa
Per me è la prima volta con VDR, per cui parecchi comandi non li capisco, come per esempio
che restituisce un errore...poi la risoluzione 1280x720 non va bene per me, andrebbe bene 1920x1080@50i....che potrei fare??
Ora viene il bello , ultimi due comandi:
Codice: Seleziona tutto
AVVIO VDR
./vdr -P'xineliboutput -l none -r 37890 -p'
vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
Codice: Seleziona tutto
vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_driver
Codice: Seleziona tutto
mce@HTPC:~$ ./vdr -P'xineliboutput -l none -r 37890 -p'
bash: ./vdr: Nessun file o directory
mce@HTPC:~$ vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1280
Height: 720
Keyboard input disabled
VDR Server: post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[5970] [vdr-fe] Detected 2 CPUs
[5970] [vdr-fe] Enabling multithreaded video decoding
WARNING: MRL does not start with 'xvdr:' (post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1)
Press Esc to exit
[5970] [input_vdr] Connecting (control) to tcp://post=tvtime:0 ...
[5970] [input_vdr] Can't connect to tcp://post=tvtime:0
[5970] [input_vdr] (ERROR (xine_input_vdr.c,5841): Connection timed out)
[5970] [input_vdr] Can't connect to tcp://post=tvtime:0
[5970] [input_vdr] (ERROR (xine_input_vdr.c,6272): Bad file descriptor)
[5970] [input_vdr] Connections closed.
[5970] [vdr-fe] fe_xine_open: xine_open("xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1#nocache;demux:mpeg_block") failed
Error opening xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
mce@HTPC:~$ vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_driver
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: vdpau
Audio driver: alsa
Aspect ratio: Default
Fullscreen mode
Keyboard input disabled
Automatic reconnection enabled
Post plugins: tvtime:method=use_vo_driver
VDR server not given, searching ...
---------------------------------------------------------------
WARNING: MRL not given and server not found from local network.
Trying to connect to default port on local host.
---------------------------------------------------------------
[6028] [vdr-fe] fe_xine_init: xine_open_video_driver("vdpau") failed
Error initializing xine
Available video drivers: xv raw opengl xshm aa none sdl vidixfb vidix fb
Available audio drivers: alsa oss esd file none
mce@HTPC:~$
Codice: Seleziona tutto
./vdr -P'xineliboutput -l none -r 37890 -p'
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Ciao MAV per lanciare vdr col comando che dai ti devi posizionare nella dir dove hai compilato vdr e nel tuo caso mi pare usr/local/src/vdr-1.7.0
e altra cosa per lanciare vdr-sxfe........ usa un altra shell sempre posizionandoti in usr/local/src/vdr-1.7.0
e altra cosa per lanciare vdr-sxfe........ usa un altra shell sempre posizionandoti in usr/local/src/vdr-1.7.0
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Grazie per la dritta tapino , anche questa non la sapevo .
Ho riprovato, ma c'è ancora qualcosa che non va .....
e poi in un'altra shell:
Ho riprovato, ma c'è ancora qualcosa che non va .....
Codice: Seleziona tutto
mce@HTPC:~$ cd /usr/local/src/vdr-1.7.0
mce@HTPC:/usr/local/src/vdr-1.7.0$ vdr -P'xineliboutput -l none -r 37890 -p'
vdr: can't access video directory /video
mce@HTPC:/usr/local/src/vdr-1.7.0$
Codice: Seleziona tutto
mce@HTPC:~$ cd /usr/local/src/vdr-1.7.0
mce@HTPC:/usr/local/src/vdr-1.7.0$ vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1920 --height=1080 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1920
Height: 1080
Keyboard input disabled
VDR Server: post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[6103] [vdr-fe] Detected 2 CPUs
[6103] [vdr-fe] Enabling multithreaded video decoding
WARNING: MRL does not start with 'xvdr:' (post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1)
Press Esc to exit
[6103] [input_vdr] Connecting (control) to tcp://post=tvtime:0 ...
[6103] [input_vdr] Can't connect to tcp://post=tvtime:0
[6103] [input_vdr] (ERROR (xine_input_vdr.c,5841): Connection timed out)
[6103] [input_vdr] Can't connect to tcp://post=tvtime:0
[6103] [input_vdr] (ERROR (xine_input_vdr.c,6272): Bad file descriptor)
[6103] [input_vdr] Connections closed.
[6103] [vdr-fe] fe_xine_open: xine_open("xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1#nocache;demux:mpeg_block") failed
Error opening xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
mce@HTPC:/usr/local/src/vdr-1.7.0$ vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1280
Height: 720
Keyboard input disabled
VDR Server: post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[6114] [vdr-fe] Detected 2 CPUs
[6114] [vdr-fe] Enabling multithreaded video decoding
WARNING: MRL does not start with 'xvdr:' (post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1)
Press Esc to exit
[6114] [input_vdr] Connecting (control) to tcp://post=tvtime:0 ...
[6114] [input_vdr] Can't connect to tcp://post=tvtime:0
[6114] [input_vdr] (ERROR (xine_input_vdr.c,5841): Connection timed out)
[6114] [input_vdr] Can't connect to tcp://post=tvtime:0
[6114] [input_vdr] (ERROR (xine_input_vdr.c,6272): Bad file descriptor)
[6114] [input_vdr] Connections closed.
[6114] [vdr-fe] fe_xine_open: xine_open("xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1#nocache;demux:mpeg_block") failed
Error opening xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
mce@HTPC:/usr/local/src/vdr-1.7.0$ vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_driver
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: vdpau
Audio driver: alsa
Aspect ratio: Default
Fullscreen mode
Keyboard input disabled
Automatic reconnection enabled
Post plugins: tvtime:method=use_vo_driver
VDR server not given, searching ...
---------------------------------------------------------------
WARNING: MRL not given and server not found from local network.
Trying to connect to default port on local host.
---------------------------------------------------------------
[6125] [vdr-fe] fe_xine_init: xine_open_video_driver("vdpau") failed
Error initializing xine
Available video drivers: xv raw opengl xshm aa none sdl vidix vidixfb fb
Available audio drivers: alsa oss esd file none
mce@HTPC:/usr/local/src/vdr-1.7.0$
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Sono due i casi:MAV ha scritto: Ho riprovato, ma c'è ancora qualcosa che non va .....Codice: Seleziona tutto
mce@HTPC:~$ cd /usr/local/src/vdr-1.7.0 mce@HTPC:/usr/local/src/vdr-1.7.0$ vdr -P'xineliboutput -l none -r 37890 -p' vdr: can't access video directory /video mce@HTPC:/usr/local/src/vdr-1.7.0$
1) la dir video non è giusta -> verifica il percorso
2) il percorso è giusto ma non hai i permessi -> dai questo comando "chown -R nome_utente /video"
Riprova.
VDRBOX:
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Software: ArchLinux 0.8 Don't Panic, VDR 1.6.0-2 con Extension Patch v.62 (> 70 plugins in IT)
Hardware: Intel P4 2,4 Ghz, 1 GB RAM, DVB-S Hauppauge WinTV Nexus-S rev 2.1, DVB-T Terratec Cinergy 1400, telecomando Terratec
Case: Compaq D510 SFF
Re: VDPAU+XINELIBOUTPUT E HDTV!!!
Ho avuto la possibilità di riporvare oggi in pausa pranzo.
Dal momento che Gringo parlava di diritti, ho provato con "sudo":
A questo punto non succede nulla e resta il prompt lampeggiante, ora sono obbligato a lanciare VDR da un'altra shell, come detto da tapino.
Ho provato con entrambi i comandi suggeriti sopra, anche settando la risoluzione 1920x1080, sempre schermo nero per pochi secondi e poi torno al terminale...
Dal momento che Gringo parlava di diritti, ho provato con "sudo":
Codice: Seleziona tutto
mce@HTPC:~$ cd /usr/local/src/vdr-1.7.0
mce@HTPC:/usr/local/src/vdr-1.7.0$ sudo vdr -P'xineliboutput -l none -r 37890 -p'
[sudo] password for mce:
Codice: Seleziona tutto
mce@HTPC:~$ cd /usr/local/src/vdr-1.7.0
mce@HTPC:/usr/local/src/vdr-1.7.0$ sudo vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1920 --height=1080 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[sudo] password for mce:
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1920
Height: 1080
Keyboard input disabled
VDR Server: post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[6041] [vdr-fe] Detected 2 CPUs
[6041] [vdr-fe] Enabling multithreaded video decoding
WARNING: MRL does not start with 'xvdr:' (post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1)
Press Esc to exit
[6041] [input_vdr] Connecting (control) to tcp://post=tvtime:0 ...
[6041] [input_vdr] Can't connect to tcp://post=tvtime:0
[6041] [input_vdr] (ERROR (xine_input_vdr.c,5841): Connection timed out)
[6041] [input_vdr] Can't connect to tcp://post=tvtime:0
[6041] [input_vdr] (ERROR (xine_input_vdr.c,6272): Bad file descriptor)
[6041] [input_vdr] Connections closed.
[6041] [vdr-fe] fe_xine_open: xine_open("xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1#nocache;demux:mpeg_block") failed
Error opening xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
mce@HTPC:/usr/local/src/vdr-1.7.0$ sudo vdr-sxfe --video=xv --aspect=16:9 --fullscreen --width=1280 --height=720 --nokbd -- post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
vdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xv
Aspect ratio: 16:9
Fullscreen mode
Width: 1280
Height: 720
Keyboard input disabled
VDR Server: post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
[6055] [vdr-fe] Detected 2 CPUs
[6055] [vdr-fe] Enabling multithreaded video decoding
WARNING: MRL does not start with 'xvdr:' (post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1)
Press Esc to exit
[6055] [input_vdr] Connecting (control) to tcp://post=tvtime:0 ...
[6055] [input_vdr] Can't connect to tcp://post=tvtime:0
[6055] [input_vdr] (ERROR (xine_input_vdr.c,5841): Connection timed out)
[6055] [input_vdr] Can't connect to tcp://post=tvtime:0
[6055] [input_vdr] (ERROR (xine_input_vdr.c,6272): Bad file descriptor)
[6055] [input_vdr] Connections closed.
[6055] [vdr-fe] fe_xine_open: xine_open("xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1#nocache;demux:mpeg_block") failed
Error opening xvdr://post=tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
mce@HTPC:/usr/local/src/vdr-1.7.0$ sudo vdr-sxfe --video=vdpau --audio=alsa --aspect=DVB --fullscreen --nokbd --reconnect --post=tvtime:method=use_vo_drivervdr-sxfe 1.0.4 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: vdpau
Audio driver: alsa
Aspect ratio: Default
Fullscreen mode
Keyboard input disabled
Automatic reconnection enabled
Post plugins: tvtime:method=use_vo_driver
VDR server not given, searching ...
Found VDR server: host 192.168.0.10, port 37890
[6068] [vdr-fe] fe_xine_init: xine_open_video_driver("vdpau") failed
Error initializing xine
Available video drivers: xv raw opengl xshm aa none sdl vidixfb vidix fb
Available audio drivers: alsa oss esd file none
mce@HTPC:/usr/local/src/vdr-1.7.0$