VDR Italia

Comunità italiana utilizzatori VDR
https://forum.vdr-italia.org/

info hauppage hvr-4000

https://forum.vdr-italia.org/viewtopic.php?t=1287

Pagina 1 di 3

info hauppage hvr-4000

Inviato: 08 feb 2010, 20:35
da asgarot
ciao a tutti ho acquistato di recente l' hauppage hvr- 4000 installata con ubuntu 9.10 e vdr 1.7.9 la scheda viene riconosciuta solo che vdr mi dice sempre no signal non vorrei che all'avvio mi parte per primo il dvb-t che per ora non ho collegato e quindi mi da' questo problema ??????????????????????? :help:

CONSIGLI !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! GRAZIE :D

Re: info hauppage hvr-4000

Inviato: 09 feb 2010, 01:18
da davidea
asgarot ha scritto:ciao a tutti ho acquistato di recente l' hauppage hvr- 4000 installata con ubuntu 9.10 e vdr 1.7.9 la scheda viene riconosciuta solo che vdr mi dice sempre no signal non vorrei che all'avvio mi parte per primo il dvb-t che per ora non ho collegato e quindi mi da' questo problema ??????????????????????? :help:

CONSIGLI !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! GRAZIE :D

guarda cosa ti dice dmesg, /var/log/user.log , vdr all' avvio..... un po' di output vario insomma e magari se e' troppo lungo postalo su pastebin.com

Re: info hauppage hvr-4000

Inviato: 09 feb 2010, 20:43
da asgarot
ciao davide ecco il mio dmesg!!!!!!!!!!!!!!!!!!!!!!! :( GRAZIE !!!!!!!!!!!!!

[ 6.699663] nvidia 0000:01:00.0: setting latency timer to 64
[ 6.700151] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.36 Wed Sep 23 07:40:15 PDT 2009
[ 6.996700] lp: driver loaded but no devices found
[ 7.147213] Linux video capture interface: v2.00
[ 7.364655] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 7.364693] cx8800 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.364901] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
[ 7.364904] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 7.422175] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[ 7.486619] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[ 7.685656] cx2388x alsa driver version 0.0.7 loaded
[ 7.815069] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.815092] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.864860] tuner 0-0043: chip found @ 0x86 (cx88[0])
[ 7.871201] tda9887 0-0043: creating new instance
[ 7.871203] tda9887 0-0043: tda988[5/6/7] found
[ 7.873986] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 7.912505] tveeprom 0-0050: Hauppauge model 69009, rev B4D3, serial# 6531596
[ 7.912507] tveeprom 0-0050: MAC address is 00-0D-FE-63-AA-0C
[ 7.912510] tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
[ 7.912512] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 7.912515] tveeprom 0-0050: audio processor is CX880 (idx 30)
[ 7.912517] tveeprom 0-0050: decoder processor is CX880 (idx 20)
[ 7.912519] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[ 7.912521] cx88[0]: hauppauge eeprom: model=69009
[ 7.934779] tuner-simple 0-0061: creating new instance
[ 7.934781] tuner-simple 0-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
[ 7.938780] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/input/input5
[ 7.938818] cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 17, latency: 64, mmio: 0xfa000000
[ 7.938826] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.948708] wm8775 0-001b: chip found @ 0x36 (cx88[0])
[ 7.955047] cx88[0]/0: registered device video0 [v4l2]
[ 7.955066] cx88[0]/0: registered device vbi0
[ 7.955085] cx88[0]/0: registered device radio0
[ 7.958787] cx88[0]/2: cx2388x 8802 Driver Manager
[ 7.958803] cx88-mpeg driver manager 0000:05:01.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.958811] cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 17, latency: 64, mmio: 0xfc000000
[ 7.958815] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.958890] cx88_audio 0000:05:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.958898] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.958916] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 8.002812] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[ 8.002815] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 8.002818] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
[ 8.002820] cx88[0]/2: cx2388x based DVB/ATSC card
[ 8.002822] cx8802_alloc_frontends() allocating 2 frontend(s)
[ 8.034128] phy0: Selected rate control algorithm 'minstrel'
[ 8.034690] phy0: hwaddr 00:15:af:3e:7a:34, RTL8187vB (default) V1 + rtl8225z2
[ 8.046369] rtl8187: Customer ID is 0x00
[ 8.046414] Registered led device: rtl8187-phy0::tx
[ 8.046441] Registered led device: rtl8187-phy0::rx
[ 8.046463] usbcore: registered new interface driver rtl8187
[ 8.237574] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.278505] tuner-simple 0-0061: attaching existing instance
[ 8.278508] tuner-simple 0-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
[ 8.280791] DVB: registering new adapter (cx88[0])
[ 8.280793] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 8.281009] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
[ 8.954901] type=1505 audit(1265747318.380:2): operation="profile_load" pid=990 name=/usr/share/gdm/guest-session/Xsession
[ 8.997020] type=1505 audit(1265747318.420:3): operation="profile_load" pid=992 name=/sbin/dhclient3
[ 8.997632] type=1505 audit(1265747318.424:4): operation="profile_load" pid=992 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.997965] type=1505 audit(1265747318.424:5): operation="profile_load" pid=992 name=/usr/lib/connman/scripts/dhclient-script
[ 9.029560] type=1505 audit(1265747318.455:6): operation="profile_load" pid=995 name=/usr/bin/evince
[ 9.039305] type=1505 audit(1265747318.463:7): operation="profile_load" pid=995 name=/usr/bin/evince-previewer
[ 9.045121] type=1505 audit(1265747318.471:8): operation="profile_load" pid=995 name=/usr/bin/evince-thumbnailer
[ 9.075580] type=1505 audit(1265747318.499:9): operation="profile_load" pid=997 name=/usr/lib/cups/backend/cups-pdf
[ 9.076293] type=1505 audit(1265747318.503:10): operation="profile_load" pid=997 name=/usr/sbin/cupsd
[ 9.091071] type=1505 audit(1265747318.515:11): operation="profile_load" pid=998 name=/usr/sbin/tcpdump
[ 11.174841] cfg80211: World regulatory domain updated:
[ 11.174844] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp

Re: info hauppage hvr-4000

Inviato: 09 feb 2010, 21:12
da asgarot
ecco il mio message log!!!!!!!!!!!!!!!!!!!!!!!!!! GRAZIE.................... :D

Feb 9 21:05:21 asgarot-desktop kernel: [ 7.272361] ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.326136] lp: driver loaded but no devices found
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.437647] Linux video capture interface: v2.00
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.852362] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.852402] cx8800 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.852619] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.852621] cx88[0]: TV tuner type 63, Radio tuner type -1
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.863884] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.885241] type=1505 audit(1265745919.307:2): operation="profile_load" pid=867 name=/usr/share/gdm/guest-session/Xsession
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.892180] type=1505 audit(1265745919.315:3): operation="profile_load" pid=868 name=/sbin/dhclient3
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.892791] type=1505 audit(1265745919.315:4): operation="profile_load" pid=868 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.893122] type=1505 audit(1265745919.315:5): operation="profile_load" pid=868 name=/usr/lib/connman/scripts/dhclient-script
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.960001] type=1505 audit(1265745919.379:6): operation="profile_load" pid=878 name=/usr/bin/evince
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.969751] type=1505 audit(1265745919.391:7): operation="profile_load" pid=878 name=/usr/bin/evince-previewer
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.974593] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
Feb 9 21:05:21 asgarot-desktop kernel: [ 7.980774] type=1505 audit(1265745919.403:8): operation="profile_load" pid=878 name=/usr/bin/evince-thumbnailer
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.113349] tuner 0-0043: chip found @ 0x86 (cx88[0])
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.166985] cx2388x alsa driver version 0.0.7 loaded
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.172743] tda9887 0-0043: creating new instance
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.172746] tda9887 0-0043: tda988[5/6/7] found
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.174610] phy0: hwaddr 00:15:af:3e:7a:34, RTL8187vB (default) V1 + rtl8225z2
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.175487] tuner 0-0061: chip found @ 0xc2 (cx88[0])
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.180613] type=1505 audit(1265745919.603:9): operation="profile_load" pid=886 name=/usr/lib/cups/backend/cups-pdf
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.181339] type=1505 audit(1265745919.603:10): operation="profile_load" pid=886 name=/usr/sbin/cupsd
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.185792] rtl8187: Customer ID is 0x00
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.185817] Registered led device: rtl8187-phy0::tx
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.185831] Registered led device: rtl8187-phy0::rx
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.185862] usbcore: registered new interface driver rtl8187
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.203749] type=1505 audit(1265745919.623:11): operation="profile_load" pid=908 name=/usr/sbin/tcpdump
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214552] tveeprom 0-0050: Hauppauge model 69009, rev B4D3, serial# 6531596
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214555] tveeprom 0-0050: MAC address is 00-0D-FE-63-AA-0C
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214558] tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214560] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214563] tveeprom 0-0050: audio processor is CX880 (idx 30)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214565] tveeprom 0-0050: decoder processor is CX880 (idx 20)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214567] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.214569] cx88[0]: hauppauge eeprom: model=69009
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.361513] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.378150] tuner-simple 0-0061: creating new instance
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.378153] tuner-simple 0-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.382168] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/input/input5
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.382208] cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 17, latency: 64, mmio: 0xfa000000
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.382217] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.403517] wm8775 0-001b: chip found @ 0x36 (cx88[0])
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.409928] cx88[0]/0: registered device video0 [v4l2]
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.409947] cx88[0]/0: registered device vbi0
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.409969] cx88[0]/0: registered device radio0
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.413687] cx88[0]/2: cx2388x 8802 Driver Manager
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.413702] cx88-mpeg driver manager 0000:05:01.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.413709] cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 17, latency: 64, mmio: 0xfc000000
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.413714] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.414054] cx88_audio 0000:05:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.414063] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.414080] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.457626] cx88/2: cx2388x dvb driver version 0.0.7 loaded
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.457634] cx88/2: registering cx8802 driver, type: dvb access: shared
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.457637] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.457639] cx88[0]/2: cx2388x based DVB/ATSC card
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.457641] cx8802_alloc_frontends() allocating 2 frontend(s)
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.509997] tuner-simple 0-0061: attaching existing instance
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.510001] tuner-simple 0-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.512279] DVB: registering new adapter (cx88[0])
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.512282] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.512557] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.850816] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6

Re: info hauppage hvr-4000

Inviato: 10 feb 2010, 02:02
da davidea
premesso che non ho la scheda in questione, quindi non ti parlo per esperienza personale.

se metti femon, cosa ti dice? su che canali ti manca il segnale? sei sicuro che la parabola funzioni? se provi a mettere un canale dvb-t il segnale c'e'? (anche con uno spezzone di filo, dovresti quanto meno veder muovere l' indicatore di segnale di femon, di cpoco vicino al minimo, ma sempre qualcosa e')

dai log, vedo

Feb 9 21:05:21 asgarot-desktop kernel: [ 8.512282] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
Feb 9 21:05:21 asgarot-desktop kernel: [ 8.512557] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...

quindi sembra che li registri, ora, se ben ricordo (non vorrei sbagliarmi , e' che ho un' altro tuner che per ora non uso!) , il mio tuner sat, ha lo stesso chipset, e all' avvio carica il firmware, infatti in /lib/firmware mi ritrovo il file
dvb-fe-cx24116.fw

in ogni caso se posti pure, USANDO PASTEBIN.COM i log proprio di vdr, fai un bel cat /var/log/user.log , magari durante un cambio canale, e' qualcosa del tipo

Codice: Seleziona tutto

Feb  9 21:29:38 vdrbox-cf vdr: [1677] EnigmaNG: cPluginSkinEnigma::LoadXpm(/video/plugins/skinenigmang/flags/ita.xpm) LOGO NOT FOUND                                    
Feb  9 21:29:38 vdrbox-cf vdr: [1677] switching to channel 192                                                                                                          
Feb  9 21:29:38 vdrbox-cf vdr: [2276] TS buffer on device 2 thread ended (pid=1677, tid=2276)                                                                           
Feb  9 21:29:38 vdrbox-cf vdr: [2275] buffer stats: 57152 (1%) used                                                                                                     
Feb  9 21:29:38 vdrbox-cf vdr: [2275] receiver on device 2 thread ended (pid=1677, tid=2275)                                                                            
Feb  9 21:29:38 vdrbox-cf vdr: [2278] receiver on device 2 thread started (pid=1677, tid=2278)                                                                          
Feb  9 21:29:38 vdrbox-cf vdr: [2279] TS buffer on device 2 thread started (pid=1677, tid=2279)                                                                         
Feb  9 21:29:39 vdrbox-cf vdr: [2278] cVideoRepacker: switching to MPEG1/2 mode                                                                                         
Feb  9 21:29:39 vdrbox-cf vdr: [2278] cVideoRepacker: operating in MPEG1/2 mode                                                                                         
Feb  9 21:36:12 vdrbox-cf vdr: [1677] switching to channel 168                                                                                                          
Feb  9 21:36:12 vdrbox-cf vdr: [2279] TS buffer on device 2 thread ended (pid=1677, tid=2279)                                                                           
Feb  9 21:36:12 vdrbox-cf vdr: [2278] buffer stats: 56588 (1%) used                                                                                                     
Feb  9 21:36:12 vdrbox-cf vdr: [2278] receiver on device 2 thread ended (pid=1677, tid=2278)                                                                            
Feb  9 21:36:12 vdrbox-cf vdr: [2322] receiver on device 2 thread started (pid=1677, tid=2322)                                                                          
Feb  9 21:36:12 vdrbox-cf vdr: [2323] TS buffer on device 2 thread started (pid=1677, tid=2323)

Re: info hauppage hvr-4000

Inviato: 10 feb 2010, 10:14
da alez
@asgarot

se non vuoi usare paste bin, almeno usa il tasto code, se no il log si legge molto + a fatica

Re: info hauppage hvr-4000

Inviato: 10 feb 2010, 18:40
da lukkino
Allora ti spiego.

Dai tuoi log la scheda parte correttamente, prima viene riconosciuta la sezione DVB-S e poi la DVB-T.
Il firmware viene caricato all'avvio di VDR.

Adesso arriva la parte fondamentale... VDR non gestisce le 2 sezioni di questa scheda, in pratica puoi utilizzare solo la sezione DVB-S.

Dalla versione di VDR 1.7.11 in poi VDR gestisce i multi frontend, cioè schede con più ingressi, ma non questa scheda. :(

Solo Kaffeine gestisce correttamente questa scheda, sia la parte DVB-S che la parte DVB-T.

Usi il firmware giusto?

Di questa scheda esistono 4 versioni di firmware che te li puoi scaricare qui:

http://lukkinosat.altervista.org/dvb-fe ... 20.79.0.fw
http://lukkinosat.altervista.org/dvb-fe ... 22.82.0.fw
http://lukkinosat.altervista.org/dvb-fe ... 23.86.1.fw
http://lukkinosat.altervista.org/dvb-fe ... 26.90.0.fw

Devi rinominare il firmware che vuoi utilizzare in dvb-fe-cx24116.fw e posizionarlo in /lib/firmware e riavviare la vdrbox .

Ciauz

Re: info hauppage hvr-4000

Inviato: 10 feb 2010, 19:00
da asgarot
ciao lukkino e grazie , grazie a tutti sinceramente io il firmware non l'ho proprio caricato !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :twisted:

faccio le prove da te elencate e vediamo!!!!!!!!!!!!!!!!!!! :mrgreen:

Re: info hauppage hvr-4000

Inviato: 10 feb 2010, 22:28
da asgarot
@lukkino provato con tutti e quattro ma nisba :twisted:

GRAZIE MILLE PER LE INFO!!!!!!!!!!!!!!!!!!!!!!!! :D

Re: info hauppage hvr-4000

Inviato: 11 feb 2010, 18:38
da lukkino
Ma hai rinominato il firmware in dvb-fe-cx24116.fw e riavviato la vdrbox?

Avvia vdr per circa 20 secondi, e poi killalo.

Faccendo:

Codice: Seleziona tutto

cat /var/log/syslog | grep "dvb-fe-cx24116.fw"
vedi qualcosa?

Ciao

Re: info hauppage hvr-4000

Inviato: 11 feb 2010, 19:52
da asgarot

Codice: Seleziona tutto

vb-fe-cx24116.fw'
Feb 10 20:31:25 asgarot-desktop kernel: [ 130.198600] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:31:25 asgarot-desktop kernel: [ 130.198608] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:31:25 asgarot-desktop firmware.sh[2490]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:31:26 asgarot-desktop kernel: [ 130.698490] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:31:26 asgarot-desktop kernel: [ 130.698497] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:31:26 asgarot-desktop firmware.sh[2501]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:31:26 asgarot-desktop kernel: [ 131.199189] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:31:26 asgarot-desktop kernel: [ 131.199197] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:31:26 asgarot-desktop firmware.sh[2512]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:12 asgarot-desktop kernel: [ 176.650934] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:12 asgarot-desktop kernel: [ 176.650940] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:12 asgarot-desktop firmware.sh[4334]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:14 asgarot-desktop kernel: [ 179.373291] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:14 asgarot-desktop kernel: [ 179.373298] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:14 asgarot-desktop firmware.sh[4362]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:16 asgarot-desktop firmware.sh[4377]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.038926] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.038933] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.043673] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.043678] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:16 asgarot-desktop firmware.sh[4384]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.233749] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.233758] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:16 asgarot-desktop firmware.sh[4401]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.420468] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:16 asgarot-desktop kernel: [ 181.420476] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:16 asgarot-desktop firmware.sh[4415]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:21 asgarot-desktop kernel: [ 186.088636] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:21 asgarot-desktop kernel: [ 186.088645] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:21 asgarot-desktop firmware.sh[4434]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:21 asgarot-desktop kernel: [ 186.095546] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:21 asgarot-desktop kernel: [ 186.095550] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:21 asgarot-desktop firmware.sh[4444]: Cannot find firmware file 'dvb-fe-cx24116.fw'
Feb 10 20:32:25 asgarot-desktop kernel: [ 189.801447] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
Feb 10 20:32:25 asgarot-desktop kernel: [ 189.801455] cx88-mpeg driver manager 0000:05:01.2: firmware: requesting dvb-fe-cx24116.fw
Feb 10 20:32:25 asgarot-desktop firmware.sh[4465]: Cannot find firmware file 'dvb-fe-cx24116.fw'

ciao lukkino ecco il risultato!!!!!!!!!!!!!!!!! :) grazie.............

Re: info hauppage hvr-4000

Inviato: 12 feb 2010, 01:20
da davidea
ti sta chiedendo il firmware, ti implora, dice se vuoi che funzioni, dammelo e ti faro' contento!!!!!!

hai messo il firmware in /lib/firmware ?????

Re: info hauppage hvr-4000

Inviato: 12 feb 2010, 20:45
da asgarot
ciao a tutti e grazie @lukkino @davide spero non mi picchiate :D ma avevo sbagliato la cartella firmware adesso funziona :lol: ho provato anche kaffeine e' fuzionano tutti i tuner !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :wink:

vi terro' aggiornati!!!!!!!!!!!!!!!!!!!!

GRAZIE DI CUORE PER AVERMI AIUTATO!!!!!!!!!!!!!!!!!!!!!!! :mrgreen:

NB: se qualcuno ha bisogno di info su questa scheda sono a vosta disposizione :?


ciao.

Re: info hauppage hvr-4000

Inviato: 12 feb 2010, 22:19
da davidea
asgarot ha scritto:ciao a tutti e grazie @lukkino @davide spero non mi picchiate :D ma avevo sbagliato la cartella firmware adesso funziona :lol: ho provato anche kaffeine e' fuzionano tutti i tuner !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :wink:

vi terro' aggiornati!!!!!!!!!!!!!!!!!!!!

GRAZIE DI CUORE PER AVERMI AIUTATO!!!!!!!!!!!!!!!!!!!!!!! :mrgreen:

NB: se qualcuno ha bisogno di info su questa scheda sono a vosta disposizione :?


ciao.
son felice che ti funzioni!!!!!!

personalmente l' avevo valutata, e poi scartata, troppo cara, e limitata nel fatto che non puoi usare i due tuner in contemporanea, il bello della mia vdrbox, e' che mentre registro qualcosa sul dvb-t , mia figlia fa incetta di cartoni sul sat!!!!

Re: info hauppage hvr-4000

Inviato: 01 apr 2010, 16:23
da navigator
davidea ha scritto:
asgarot ha scritto:ciao a tutti e grazie @lukkino @davide spero non mi picchiate :D ma avevo sbagliato la cartella firmware adesso funziona :lol: ho provato anche kaffeine e' fuzionano tutti i tuner !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :wink:

vi terro' aggiornati!!!!!!!!!!!!!!!!!!!!

GRAZIE DI CUORE PER AVERMI AIUTATO!!!!!!!!!!!!!!!!!!!!!!! :mrgreen:

NB: se qualcuno ha bisogno di info su questa scheda sono a vosta disposizione :?


ciao.
son felice che ti funzioni!!!!!!

personalmente l' avevo valutata, e poi scartata, troppo cara, e limitata nel fatto che non puoi usare i due tuner in contemporanea, il bello della mia vdrbox, e' che mentre registro qualcosa sul dvb-t , mia figlia fa incetta di cartoni sul sat!!!!
Ho la stessa scheda e da un pò che tento di installare vdr 1.7.12 o 1.7.14 ............ Ho una partizione del disco fisso che mi supplica di non formattarla più (tante sono le volte che ho tentato)

Per l'installazione uso uno script reperibile in rete ....... a molti va a buon fine a me no a causa, credo, dei driver della scheda hauppauge hvr 4000 che ho anche io.

Non é che mi daresti qualche spiegazione su come hai fatto l'installazione ?

Ti preciso che io ho installato ubu 9.10 e provato con i kernel 2.6.28, 30, 31, 32, 33 sia con i driver che installa lo script (S2-liplianin) sia con quelli nativi del kernel, ovviamente installando sempre il firmware per hauppauge. Ho usato anche vdpau con driver nvidia per xine.

Alla fine é sempre no signal e se clicco sulla scheda dvb di xine dice che non c'è "device".

Spero mi puoi descrivere i passaggi che hai fatto.

Saluti e grazie
Tutti gli orari sono UTC+02:00
Pagina 1 di 3

Creato da phpBB® Forum Software © phpBB Limited

Traduzione Italiana phpBB-Italia.it